ДСТУ EN 50341-2-22:2022 Воздушные электрические линии свыше 1 кВ переменного тока. Часть 2-22. Национальные нормативные аспекты (NNA) для Польши (на основе EN 50341-1:2012) (EN 50341-2-22:2022, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 28.12.2022 № 285

EN 50341-2-22:2022

Overhead electrical lines exceeding AC 1 kV -
Part 2-22: National Normative Aspects (NNA) for Poland
(based on EN 50341-1:2012)

прийнято як національний стандарт
методом «підтвердження» за позначенням

ДСТУ EN 50341-2-22:2022
(EN 50341-2-22:2022, IDT)

Повітряні електричні лінії понад 1 кВ змінного струму.
Частина 2-22. Національні нормативні аспекти (NNA) для Польщі
(на основі EN 50341 1:2012)

З наданням чинності від 2023-12-31

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

1 Scope

1.1 General

1.2 Field of application

2 Normative references, definitions and symbols

2.1 Normative references

2.2 Definitions

3 Basis of design

3.2 Requirements of overhead lines

3.6 Design values

4 Actions on lines

4.3 Wind loads

4.4 Wind forces on overhead line components

4.5 Ice loads

4.6 Combined wind and ice loads

4.7 Temperature effects

4.8 Security loads

4.9 Safety loads

4.10 Forces due to short-circuit currents

4.12 Load cases

4.13 Partial factors for actions

5 Electrical requirements

5.3 Insulation со-ordination

5.5 Minimum air clearance distances to avoid flashover

5.6 Load cases for calculation of clearances

5.8 Internal clearances within the span and at the top of support

5.9 External clearances

6 Earthing systems

6.1 Introduction

6.2 Ratings with regard to corrosion and mechanical strength

6.4 Dimensioning with regard to human safety

7 Supports

7.3 Lattice steel towers

7.4 Steel poles

7.5 Wood poles

7.6 Concrete poles

7.10 Maintenance facilities

7.11 Loading tests

7.12 Assembly and erection

8 Foundations

8.1 Introduction

8.2 Basis of geotechnical design (EN 1997-1:2004 - Section 2)

8.3 Soil investigation and geotechnical data (EN 1997-1:2004 - Section 3)

8.4 Supervision of construction, monitoring and maintenance (EN 1997-1:2004 - Section 4)

9 Conductors and earth-wires

9.2 Aluminium based conductors

9.3 Steel based conductors

9.5 Conductors and ground wires containing optical fibre telecom munication circuits

9.6 General requirements

10 Insulators

10.4 Pollution performance requirements

10.5 Power arc requirements

10.7 Mechanical requirements

11 Hardware

11.6 Mechanical requirements

12 Quality assurance, checks and taking-over

Annex J (normative) Angles in lattice steel towers

Annex К (normative) Steel poles

Annex M (informative) Geotechnical and structural design of foundations

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online