ДСТУ EN 13230-1:2015 Железнодорожный транспорт. Колея. Бетонные шпалы и опоры. Часть 1. Общие требования (EN 13230-1:2009, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство «Український науково-дослідний і навчальний центр проблем стандартизації, сертифікації та якості» (З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 25.12.2015 №205

EN 13230-1:2009

Railway applications. Track. Concrete sleepers and bearers. General requirements

прийнято як національний стандарт методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13230-1:2015 (EN 13230-1:2009, IDT)

Залізничний транспорт. Колія. Бетонні шпали та опори. Частина 1. Загальні вимоги

З наданням чинності від 2016-01-01

Contents

Foreword

Introduction

1  Scope

2  Normative references

3  Terms and definitions

4  Common characteristics

4.1  General

4.2  Loading

4.2.1  Loads

4.2.2  Load distribution

4.3  Design bending moments

4.3.1  General

4.3.2  Bending moments at rail seat

4.3.3  Bending moments at the centre part

4.4  Data to be supplied

4.4.1  General

4.4.2  Data to be supplied by the purchaser

4.4.3  Data to be supplied by the supplier

5  Materials

5.1  General requirements

5.2  Cement

5.3  Aggregates

5.4  Mixing water

5.5  Admixtures

5.6  Concrete

5.7  Steel

5.7.1  Prestressing tendons

5.7.2  Reinforcing steel

5.7.3  Steel connecting bar

5.8  Embedded components

6  General requirements

6.1  Design

6.1.1  Geometrical design

6.1.2  Concrete cover

6.1.3  Prestressing system design

6.1.4  Reinforcing steel design

6.2  Manufacturing process

6.2.1  General  requirements

6.2.2  Natural curing

6.2.3  Accelerated curing

6.3  Surface finish

6.4  Marking

7  Product testing

7.1  General

7.2  Mechanical  parameters

7.3  Tests on product

7.4  Tests on concrete

7.5  Tests in combination with the fastening system

7.6  Additional tests

8  Quality control

8.1  General

8.2  Quality control during design approval tests

8.3  Quality control during manufacturing

Annex A (informative)  Test method to determine the Taber Wear index for a fine aggregate

A.1  General

A.2  Apparatus

A.3  Preparation of Mortar Tiles

A.3.1  Sampling

A.3.2  Mortar Tile preparation

A.3.3  Mortar Tile curing

A.3.4  Grinding of Mortar Tiles

A.4  Test procedure

A.5  Calculation of Taber Wear Index

Annex B (informative)  Test method for freeze-thaw resistance

Annex C (informative)  Test method for measuring the water absorption of concrete at atmospheric pressure

C.1  Introduction

C.2  Samples

C.3  Sequence of test

C.4  Requirements

Annex D (informative)  Definition and recommendation for measurement of rail seat inclination and twist between rail seats

Annex E (informative)  Bending moment calculation

Annex F (informative)  Surface finish

F.1  General

F.2  General information for surface finish

F.3  Surface finish of the rail seat

F.4  Surface finish of all other surfaces

F.5  Detailed procedure for remedial work

Annex G (informative)  Quality control during manufacturing - Routine tests and frequency of testing

G.1  General

G.2  Data of the sleeper to be checked

G.3  Examples for frequency of testing

Annex ZA (informative)  Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online