ДСТУ EN 13129:2018 Железнодорожный транспорт. Кондиционирование воздуха основного подвижного состава. Параметры комфорта и типовые испытания (EN 13129:2016, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 18.12.2018 № 502

EN 13129:2016

Railway applications - Air conditioning for main line rolling stock -
Comfort parameters and type tests

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 13129:2018
(EN 13129:2016, IDT)

Залізничний транспорт.
Кондиціонування повітря основного рухомого складу.
Параметри комфорту та типові випробування  

З наданням чинності від 2019-01-01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

European foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Compliance with the standard

5 Comfort parameters

6 Quality limits

7 Service conditions

7.1 Exterior conditions

7.2 Interior conditions

8 Performance of the heating and cooling installations

8.1 Preheating

8.2 Heating

8.3 Precooling

8.4 Cooling

8.5 Stand by operation

8.6 Door opening sequence

8.7 Degraded mode operation

9 Control

9.1 General

9.2 Interior temperature setting

9.3 Quality of regulation

10 Comfort conditions to be respected

10.1 Parameters in the comfort envelope

10.2 Parameters in the annex areas

10.3 Interior parameters in the catering service areas (galley zone)

10.4 Limits of temperature values

11 Supplementary requirements

11.1 Heat transfer coefficient

11.2 Solar factor (g) of the windows

11.3 Cleaning of air conditioning installation

12 Air movement tests

12.1 Air flow tests at standstill

12.2 Air flow tests when driving

12.3 Air speed tests

13 Climatic tests

13.1 General remarks

13.2 Preheating test

13.3 Precooling test

13.4 Regulation tests

13.5 Functionality tests

14 Supplementary tests

14.1 Determination of the heat transfer coefficient

14.2 Thermography

15 Methods of measurement - Measuring instruments

15.1 General remarks

15.2 Temperatures

15.3 Relative humidity

15.4 Air speed

15.5 Airflow rate

15.6 Simulated speed of the vehicle

15.7 Equivalent solar energy

15.8 Energy consumption and power rating

16 Characteristics of the test equipment

16.1 General remarks

16.2 Occupation

16.3 Temperature and uniformity of the climatic chamber

16.4 Relative humidity

16.5 Simulation of wind speed

16.6 Equivalent solar energy

17 Distribution of measuring points

17.1 Distribution of sensors in the vehicle

17.2 Climatic chamber sensors distribution

Annex A (informative) Grouping of countries in climatic zones

Annex B (normative) Calculation method of the overall conformity level CL

Annex C (normative) Tests for verification of comfort parameters

Annex D (normative) Equivalent solar energy (Simulation of solar exposure)

Annex E (normative) Location of the measuring points used for the determination of the mean interior temperature in the comfort envelope (Tim), horizontal range of the extreme interior air temperatures and the measuring point location in the local annexes

Annex F (normative) Location of the measuring points used for the determination of the vertical ranges of the extreme interior air temperatures and relative humidity across the comfort envelope

Annex G (normative) Location of the measuring points used for the determination of the variation of internal temperatures within the comfort envelope  

Annex H (informative) Location of the sensors in the climatic chamber

Annex I (normative) Typical daily profiles

Annex J (normative) Heat emission per person

Annex K (informative) Abbreviations

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online