ДСТУ EN 14067-6:2019 Железнодорожный транспорт. Аэродинамика. Часть 6. Требования и методы испытаний к оценке поперечного ветра (EN 14067-6:2018, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 26.09.2019 № 294

EN 14067-6:2018

Railway applications — Aerodynamics —
Part 6: Requirements and test procedures
for cross wind assessment

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 14067-6:2019
(EN 14067-6:2018, IDТ)

Залізничний транспорт. Аеродинаміка.
Частина 6. Вимоги та методи випробування
до оцінювання поперечного вітру

З наданням чинності від 2020-01-01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Methods and requirements to assess cross wind stability of vehicles

5.1 General

5.2 Applicability of cross wind methodologies for rolling stock assessment purposes

5.3 Determination of aerodynamic coefficients

5.4 Determination of wheel unloading due to cross winds

5.5 Presentation form of characteristic wind curves (CWCs)

5.6 Requirements

6 Method to acquire the needed railway line data

6.1 General

6.2 Presentation form of railway line data

7 Methods to assess the wind exposure of a railway line

8 Guidance for the analysis and assessment of the cross wind risk

8.1 General

8.2 Infrastructure with train speeds at or above 250 km/h

8.3 Infrastructure with train speeds below 250 km/h

9 Required documentation

9.1 General

9.2 Assessment of cross wind stability of passenger vehicles and locomotives

9.3 Assessment of cross wind stability of freight vehicles

9.4 Acquisition of railway line data

Annex A (informative) Application of methods to assess cross wind stability of vehicles within Europe

Annex В (informative) Blockage correction

Annex C (normative) Wind tunnel benchmark test data for standard ground configuration

Annex D (informative) Other ground configurations for wind tunnel testing

Annex E (informative) Wind tunnel benchmark test data for other ground configurations

Annex F (informative) Embankment overspeed effect

Annex G (informative) Atmospheric boundary layer wind tunnel testing

Annex H (informative) Five mass model

Annex I (normative) Mathematical model for the Chinese hat

Annex J (informative) Stochastic wind model

Annex К (informative) Stability of passenger vehicles and locomotives against overturning according to national guidelines

Annex L (informative) Information on methods to assess the wind exposure of a railway line

Annex M (informative) Extended CWCs

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC aimed to be covered

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online