ДСТУ EN ISO 6185-3:2019 Лодки надувные. Часть 3. Лодки с длиной корпуса до 8 м и максимальной мощностью двигателя от 15 кВт и выше (EN ISO 6185-3:2018, IDT; ISO 6185-3:2014, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 04.12.2019 № 401
EN ISO 6185-3:2018
Inflatable boats —
Part 3: Boats with a hull length less than 8 m with
a motor rating of 15 kW and greater
(ISO 6185-3:2014)
прийнято як національний стандарт
методом підтвердження за позначенням
ДСТУ EN ISO 6185-3:2019
(EN ISO 6185-3:2018, IDT; ISO 6185-3:2014, IDT)
Човни надувні.
Частина 3. Човни з довжиною корпусу до 8 м
та максимальною потужністю двигуна від 15 кВт і вище
З наданням чинності від 2020–01–01
Відповідає офіційному тексту
З питань придбання офіційного видання звертайтесь
до
національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Structural Materials
5.1 General
5.2 Materials making up the flexible floor and buoyancy tube
5.3 Wood
5.4 Metal parts
5.5 Glass-reinforced plastics
5.6 Other materials
5.7 Buoyant material used in foam filled buoyancy tubes
6 Functional components
6.1 Conditioning
6.2 Fittings bonded to the flexible parts of the boat
6.3 Manual lifting and carrying devices
6.4 Valves (if applicable)
6.5 Rowlocks and oars
6.6 Transom (where applicable)
6.7 Hull drainage
6.8 Remote steering system (where offered as standard or optional equipment)
6.9 Towing, anchoring and mooring devices
6.10 Seating and attachment systems (where offered as a standard or optional equipment)
6.11 Electrical installations (where offered as standard or optional equipment)
6.12 Engine and engine spaces
6.13 Fuel systems
6.14 Ventilation of petrol engine and/or petrol tank compartments (where applicable)
6.15 Devices for lifting the boat (if applicable)
6.16 Fire protection (if applicable)
6.17 Openings in hull, deck or superstructure
6.18 Gas systems
6.19 Navigational lights
6.20 Discharge prevention
7 Safety requirements of the completed boat
7.1 Maximum Load Capacity
7.2 Crew limit (CL)
7.3 Static stability
7.4 Buoyancy requirements
7.5 Compartmentation
7.6 Nominal pressures (inflatable buoyancy tubes)
7.7 Strength of the inflatable buoyancy tube
7.8 Maximum motor power
7.9 Man overboard prevention and recovery
7.10 Field of vision from the helm position
7.11 Provision for (a) liferaft(s)
7.12 Strength of the Rigid Structure (type test only)
7.13 Strength of principal fitted accessories
7.14 Safety Sign
8 Performance
8.1 General
8.2 Drop test (Ribs only)
8.3 In-water performance
8.4 Rowing test (where applicable, see 6.5)
8.5 Watertightness test (not applicable to open floor, self-bailing boats)
8.6 Manoeuvring-speed test
8.7 Self-Draining (type VIII Boats only)
9 Builder's plate(s)
10 Owner's manual
11 Standard equipment
Annex A (informative) General arrangement of a typical Type VII boat
Annex В (informative) General arrangement of a typical Type VIII boat
Bibliography
Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».