ДСТУ EN ISO 13501:2021 Нефтяная и газовая промышленность. Промывочные жидкости. Оценка технологического оборудования (EN ISO 13501:2011, IDT; ISO 13501:2011, IDT)



ДСТУ EN ISO 13501:2021
(EN ISO 13501:2011, IDT; ISO 13501:2011, IDT)

Нафтова та газова промисловість. Промивальні рідини.
Оцінювання технологічного устатковання

 

 
 
 
     
Не є офіційним виданням.
Офіційне видання розповсюджує національний орган стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

Scope

2 Normative references

3 Terms, definitions, symbols and abbreviated terms

3.1 Terms and definitions

3.2 Symbols and abbreviated terms

4 Requirements

5 System performance of drilled-solids removal

5.1 Principle

5.2 Apparatus

5.3 Sampling

5.4 Procedure

6 Rigsite evaluation of drilled-solids management equipment

6.1 Principle

6.2 Application

6.3 Sampling of streams for capture analysis

6.4 Determination of mass fraction (percent) solids

6.5 Calculation of capture

6.6 Interpretation of results

6.7 Procedure for characterizing removed solids

6.8 Calculation of mass fraction (percent) of low-gravity solids

6.9 Particle size assessment on removed solids

6.10 Economics

7 Practical operational guidelines

7.1 Principle

7.2 Apparatus

7.3 Procedure for design and operation

7.4 Design of shale shakers

7.5 Operation of shale shakers

7.6 Design of degassers

7.7 Operation of degassers

7.8 Design of desanders and desilters

7.9 Design of mud cleaners

7.10 Design of centrifuges

7.11 Use of addition sections

7.12 Use of drilling fluid mixing and blending equipment

7.13 Use of suction section

7.14 Use of discharge section

8 Conductance of shale shaker screens

8.1 Principle

8.2 Principle of conductance

8.3 Apparatus for measurement of conductance

8.4 Procedure for calibrating fluid

8.5 Procedure for flow test

8.6 Procedure for measuring pressure drop

8.7 Procedure for conductance test

8.8 Calculation of conductance

9 Shale shaker screen designation

9.1 Principle

9.2 Apparatus

9.3 Preparation of aluminium oxide test media

9.4 Preparation of test screen

9.5 Test procedure

9.6 Calculation of D100 separation for test screen cloth

10 Non-blanked area of shale shaker screen panel

10.1 Principle

10.2 Apparatus

10.3 Procedure for pretensioned or perforated panel-type screens

10.4 Calculation for pretensioned or perforated panel-type screens

10.5 Procedure for open-hook strip panels

10.6 Calculation for open-hook strip panels

10.7 Example calculation of total non-blanked area for a panel-mount screen

11 Shale shaker screen labelling

11.1 API screen designation

11.2 Label and tag format

11.3 API screen designation label examples

11.4 Other screen label and tags

Annex A (informative) Derivation of capture equation

Annex B (informative) Finder's method

Bibliography