ДСТУ EN 60034-18-42:2022 Машины электрические вращающиеся. Часть 18-42. Системы электрической изоляции, устойчивые к частичному разряду (тип II), которые используются во вращающихся электрических машинах, пит...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 28.12.2022 № 285

EN 60034-18-42:2017

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical
insulation systems (Type II) used in rotating electrical machines fed from voltage
converters - Qualification tests

прийнято як національний стандарт
методом «підтвердження» за позначенням

ДСТУ EN 60034-18-42:2022
(EN 60034-18-42:2017, IDT; IEC 60034-18-42:2017, IDT)

Машини електричні обертові. Частина 18-42. Системи електричної ізоляції, стійкі
до часткового розряду (тип II), які використовують в обертових електричних
машинах, що живляться від перетворювачів напруги. Кваліфікаційні випробування

З наданням чинності від 2023-12-31

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

CONTENTS

FOREWORD

INTRODUCTION

1 Scope

2 Normative references

3 Terms and definitions

4 Machine terminal voltages arising from converter operation

5 Electrical stresses in the insulation system of machine windings

5.1 General

5.2 Voltages stressing the phase to phase insulation

5.3 Voltages stressing the phase to ground insulation

5.4 Voltages stressing the turn to turn insulation

6 Voltage rating for Type II insulation systems

7 Stress factors for converter-fed Type II insulation systems

8 Qualification tests

8.1 General

8.2 Qualification tests

9 Qualification of mainwall insulation system

9.1 General

9.2 Test methods

9.3 Use of 50 Hz or 60 Hz life data to predict the service life with a converter drive

10 Qualification of turn insulation

10.1 General

10.2 Test methods

11 Qualification of the stress control system

11.1 General

11.2 Test methods

12 Preparation of test objects

12.1 General

12.2 Mainwall specimens

12.3 Turn to turn specimens

12.4 Stress control specimens

13 Qualification test procedures

13.1 General

13.2 Mainwall insulation

13.3 Turn to turn insulation

13.4 Stress control system

14 Qualification test pass criteria

14.1 Mainwall insulation

14.2 Turn to turn insulation

14.3 Stress control system

15 Routine test

16 Optional screening tests

17 Analysis, reporting and classification

Annex A (informative) Contributions to ageing of the mainwall insulation

Annex В (informative) Examples of circuits for impulse testing

Annex C (informative) Derivation of the short term endurance test voltage

Annex D (informative) Derivation of the impulse voltage insulation class for the machine insulation

Annex E (normative) Derivation of an I VIC in the absence of a manufacturer’s reference life line

Annex F (informative) Optional screening tests

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online