ДСТУ IEC 61850-7-4:2014 Коммуникационные сети и системы для автоматизации электроэнергетических предприятий. Часть 7-4. Базовая коммуникационная структура. Совместимые классы логических узлов и классы данных...

НАЦІОНАЛЬНИЙ СТАНДАРТ УКРАЇНИ

КОМУНІКАЦІЙНІ МЕРЕЖІ ТА СИСТЕМИ ДЛЯ АВТОМАТИЗАЦІЇ ЕЛЕКТРОЕНЕРГЕТИЧНИХ ПІДПРИЄМСТВ
Частина 7-4. Базова комунікаційна структура Сумісні класи логічних вузлів та класи даних

(ІЕС 61850-7-4:2010, IDT)
ДСТУ ІЕС 61850-7-4:2014

Відповідає офіційному тексту

Київ

ЗМІСТ

Національний вступ

ІЕС 61850-7-4:2010

Додаток НА Перелік національних стандартів України, згармонізованих із міжнародними нормативними документами, на які є посилання в ІЕС 61850-7-4:2010

CONTENTS

FOREWORD

INTRODUCTION

1 Scope

2 Normative references

3 Terms and definitions

4 Abbreviated terms

5 Logical node classes

5.1 Logical node groups

5.2 Interpretation of logical node tables

5.3 System logical nodes LN group: L

5.3.1 LN: relationships

5.3.2 LN: Physical device information Name: LPHD

5.3.3 LN: common logical node Name: Common LN

5.3.4 LN: Logical node zero Name: LLNO

5.3.5 LN: Physical communication channel supervision Name: LCCH

5.3.6 LN: GOOSE subscription Name: LGOS

5.3.7 LN: Sampled value subscription Name: LSVS

5.3.8 LN: Time management Name: LTIM

5.3.9 LN: Time master supervision Name: LTMS

5.3.10 LN: Service tracking Name: LTRK

5.4 Logical nodes for automatic control LN Group: A

5.4.1 Modelling remarks

5.4.2 LN: Neutral current regulator Name: ANCR

5.4.3 LN: Reactive power control Name: ARCO

5.4.4 LN: Resistor control Name: ARIS

5.4.5 LN: Automatic tap changer controller Name: ATCC

5.4.6 LN: Voltage control Name: AVCO

5.5 Logical nodes for control LN Group: С

5.5.1 Modelling remarks

5.5.2 LN: Alarm handling Name: CALH

5.5.3 LN: Cooling group control Name: CCGR

5.5.4 LN: Interlocking Name: CILO

5.5.5 LN: Point-on-wave switching Name: CPOW

5.5.6 LN: Switch controller Name: CSWI

5.5.7 LN: Synchronizer controller Name: CSYN

5.6 Logical nodes for functional blocks LN group F

5.6.1 Modelling remarks

5.6.2 LN: Counter Name: FCNT

5.6.3 LN: Curve shape description Name: FCSD

5.6.4 LN: Generic filter Name: FFIL

5.6.5 LN: Control function output limitation Name: FLIM

5.6.6 LN: PID regulator Name: FPID

5.6.7 LN: Ramp function Name: FRMP

5.6.8 LN: Set-point control function Name: FSPT

5.6.9 LN: Action at over threshold Name: FXOT

5.6.10 LN: Action at under threshold Name: FXUT

5.7 Logical nodes for generic references LN Group: G

5.7.1 Modelling remarks

5.7.2 LN: Generic automatic process control Name: GAPC

5.7.3 LN: Generic process I/O Name: GGIO

5.7.4 LN: Generic log Name: GLOG

5.7.5 LN: Generic security application Name: GSAL

5.8 Logical nodes for interfacing and archiving LN Group: 1

5.8.1 Modelling remarks

5.8.2 LN: Archiving Name: IARC

5.8.3 LN: Human machine interface Name: IHMI

5.8.4 LN: Safety alarm function Name: ISAF

5.8.5 LN: Telecontrol interface Name: ITCI

5.8.6 LN: Telemonitoring interface Name: ITMI

5.8.7 LN: Teleprotection communication interfaces Name: ITPC

5.9 Logical nodes for mechanical and non-electric primary equipment LN group К

5.9.1 Modelling remarks

5.9.2 LN: Fan Name: KFAN

5.9.3 LN: Filter Name: KFIL

5.9.4 LN: Pump Name: KPMP

5.9.5 LN: Tank Name: KTNK

5.9.6 LN: Valve control Name: KVLV

5.10 Logical nodes for metering and measurement LN Group: M

5.10.1 Modelling remarks

5.10.2 LN: Environmental information Name: MENV

5.10.3 LN: Flicker measurement name Name: MFLK

5.10.4 LN: Harmonics or interharmonics Name: MHAI

5.10.5 LN: Non-phase-related harmonics or interharmonics Name: MHAN

5.10.6 LN: Hydrological information Name: MHYD

5.10.7 LN: DC measurement Name: MMDC

5.10.8 LN: Meteorological information Name: MMET

5.10.9 LN: Metering Name: MMTN

5.10.10 LN: Metering Name: MMTR

5.10.11 LN: Non-phase-related measurement Name: MMXN

5.10.12 LN: Measurement Name: MMXU

5.10.13 LN: Sequence and imbalance Name: MSQI

5.10.14 LN: Metering statistics Name: MSTA

5.11 Logical nodes for protection functions LN Group: P

5.11.1 Modelling remarks

5.11.2 LN: Differential Name: PDIF

5.11.3 LN: Direction comparison Name: PDIR

5.11.4 LN: Distance Name: PDIS

5.11.5 LN: Directional overpower Name: PDOP

5.11.6 LN: Directional underpower Name: PDUP

5.11.7 LN: Rate of change of frequency Name: PFRC

5.11.8 LN: Harmonic restraint Name: PHAR

5.11.9 LN: Ground detector Name: PHIZ

5.11.10 LN: Instantaneous overcurrent Name: PIOC

5.11.11 LN: Motor restart inhibition Name: PMRI

5.11.12 LN: Motor starting time supervision Name: PMSS

5.11.13 LN: Over power factor Name: POPF

5.11.14 LN: Phase angle measuring Name: PPAM

5.11.15 LN: Rotor protection Name: PRTR

5.11.16 LN: Protection scheme Name: PSCH

5.11.17 LN: Sensitive directional earthfault Name: PSDE

5.11.18 LN: Transient earth fault Name: PTEF

5.11.19 LN: Thyristor protection Name: PTHF

5.11.20 LN: Time overcurrent Name: PTOC

5.11.21 LN: Overfrequency Name: PTOF

5.11.22 LN: Overvoltage Name: PTOV

5.11.23 LN: Protection trip conditioning Name: PTRC

5.11.24 LN: Thermal overload Name: PTTR

5.11.25 LN: Undercurrent Name: PTUC

5.11.26 LN: Underfrequency Name: PTUF

5.11.27 LN: Undervoltage Name: PTUV

5.11.28 LN: Underpower factor Name: PUPF

5.11.29 LN: Voltage controlled time overcurrent Name: PVOC

5.11.30 LN: Volts per Hz Name: PVPH

5.11.31 LN: Zero speed or underspeed Name: PZSU

5.12 Logical nodes for power quality events LN Group: Q

5.12.1 Modelling remarks

5.12.2 LN: Frequency variation Name: QFVR

5.12.3 LN: Current transient Name: QITR

5.12.4 LN: Current unbalance variation Name: QIUB

5.12.5 LN: Voltage transient Name: QVTR

5.12.6 LN: Voltage unbalance variation Name: QVUB

5.12.7 LN: Voltage variation Name: QVVR

5.13 Logical nodes for protection related functions LN Group: R

5.13.1 Modelling remarks

5.13.2 LN: Disturbance recorder channel analogue Name: RADR

5.13.3 LN: Disturbance recorder channel binary Name: RBDR

5.13.4 LN: Breaker failure Name: RBRF

5.13.5 LN: Directional element Name: RDIR

5.13.6 LN: Disturbance recorder function Name: RDRE

5.13.7 LN: Disturbance record handling Name: RDRS

5.13.8 LN: Fault locator Name: RFLO

5.13.9 LN: Differential measurements Name: RMXU

5.13.10 LN: Power swing detection/blocking Name: RPSB

5.13.11 LN: Autoreclosing Name: RREC

5.13.12 LN: Synchronism-check Name: RSYN

5.14 Logical nodes for supervision and monitoring LN Group: S

5.14.1 Modelling remarks

5.14.2 LN: Monitoring and diagnostics for arcs Name: SARC

5.14.3 LN: Circuit breaker supervision Name: SCBR

5.14.4 LN: Insulation medium supervision (gas) Name: SIMG

5.14.5 LN: Insulation medium supervision (liquid) Name: SIML

5.14.6 LN: Tap changer supervision Name: SLTC

5.14.7 LN: Supervision of operating mechanism Name: SOPM

5.14.8 LN: Monitoring and diagnostics for partial discharges Name: SPDC

5.14.9 LN: Power transformer supervision Name: SPTR

5.14.10 LN: Circuit switch supervision Name: SSWl

5.14.11 LN: Temperature supervision Name: STMP

5.14.12 LN: Vibration supervision Name: SVBR

5.15 Logical nodes for instrument transformers and sensors LN Group: T

5.15.1 Modelling remarks

5.15.2 LN: Angle Name: TANG

5.15.3 LN: Axial displacement Name: TAXD

5.15.4 LN: Current transformer Name: TCTR

5.15.5 LN: Distance Name: TDST

5.15.6 LN: Liquid flow Name: TFLW

5.15.7 LN: Frequency Name: TFRQ

5.15.8 LN: Generic sensor Name: TGSN

5.15.9 LN: Humidity Name: THUM

5.15.10 LN: Media level Name: TLVL

5.15.11 LN: Magnetic field Name: TMGF

5.15.12 LN: Movement sensor Name: TMVM

5.15.13 LN: Position indicator Name: TPOS

5.15.14 LN: Pressure sensor Name: TPRS

5.15.15 LN: Rotation transmitter Name: TRTN

5.15.16 LN: Sound pressure sensor Name: TSND

5.15.17 LN: Temperature sensor Name: TTMP

5.15.18 LN: Mechanical tension / stress Name: TTNS

5.15.19 LN: Vibration sensor Name: TVBR

5.15.20 LN: Voltage transformer Name: TVTR

5.15.21 LN: Water acidity Name: TWPH

5.16 Logical nodes for switchgear LN Group: X

5.16.1 Modelling remarks

5.16.2 LN: Circuit breaker Name: XCBR

5.16.3 LN: Circuit switch Name: XSWI

5.17 Logical nodes for power transformers LN Group: Y

5.17.1 Modelling remarks

5.17.2 LN: Earth fault neutralizer (Petersen coil) Name: YEFN

5.17.3 LN: Tap changer Name: YLTC

5.17.4 LN: Power shunt Name: YPSH

5.17.5 LN: Power transformer Name: YPTR

5.18 Logical nodes for further power system equipment LN Group: Z

5.18.1 Modelling remarks

5.18.2 LN: Auxiliary network Name: ZAXN

5.18.3 LN: Battery Name: ZBAT

5.18.4 LN: Bushing Name: ZBSH

5.18.5 LN: Power cable Name: ZCAB

5.18.6 LN: Capacitor bank Name: ZCAP

5.18.7 LN: Converter Name: ZCON

5.18.8 LN: Generator Name: ZGEN

5.18.9 LN: Gas insulated line Name: ZGIL

5.18.10 LN: Power overhead line Name: ZLIN

5.18.11 LN: Motor Name: ZMOT

5.18.12 LN: Reactor Name: ZREA

5.18.13 LN: Resistor Name: ZRES

5.18.14 LN: Rotating reactive component Name: ZRRC

5.18.15 LN: Surge arrestor Name: ZSAR

5.18.16 LN: Semi-conductor controlled rectifier Name: ZSCR

5.18.17 LN: Synchronous machine Name: ZSMC

5.18.18 LN: Thyristor controlled frequency converter Name: ZTCF

5.18.19 LN: Thyristor controlled reactive component Name: ZTCR

6 Data object name semantics

Annex A (normative) Interpretation of mode and behaviour

Annex В (normative) Local I Remote concept

Annex С (informative) Deprecated logical node classes

Annex D (informative) Relationship between this standard and ІЕС 61850-5

Annex E (informative) Algorithms used in logical nodes for automatic control

Annex F (normative) Statistical calculation

Annex G (normative) Functional relationship of data objects of autorecloser RREC

Annex H (normative) SCL enumerations

Bibliography

Figure 1 - Overview of this standard

Figure 2 - LOGICAL NODE relationships

Figure E.1 - Example of curve based on an indexed gate position providing water flow

Figure E.2 - Example of curve based on an indexed guide vane position (x axis) vs. net head (y axis) giving an interpolated runner blade position (Z axis)

Figure E.3 - Example of a proportional-integral-derivate controller

Figure E.4 - Example of a power stabilisation system

Figure E.5 - Example of a ramp generator

Figure E.6 - Example of an interface with a set-point algorithm

Figure F.1 - Statistical calculation of a vector 168

Figure F.2 - Examples of statistical calculations

Figure G.1 - Diagram of autorecloser function

Table 1 - List of logical node groups

Table 2 - Interpretation of logical node tables

Table 3 - Relation between ІЕС 61850-5 and ІЕС 61850-7-4 for automatic control LNs

Table 4 - Relation between ІЕС 61850-5 and ІЕС 61850-7-4 for control LNs

Table 5 - Conditional attributes in FPID

Table 6 - Relation between ІЕС 61850-5 and ІЕС 61850-7-4 for metering and measurement LNs

Table 7 - Relation between ІЕС 61850-5 and ІЕС 61850-7-4 (this standard) for protection LNs

Table 8 - Relation between ІЕС 61850-5 and . ІЕС 61850-7-4 for protection related LN

Table 9 - Relation between ІЕС 61850-5 and ІЕС 61850-7-4 for supervision and monitoring LNs

Table 10 - Description of data objects

Table A.1 - Values of mode and behaviour

Table A.2 - Definition of mode and behaviour

Table В.1 - Relationship between Loc/Rem data objects and control authority

Table D.1 - Relationship between ІЕС 61850-5 and this standard for some miscellaneous LNs