ДСТУ EN 12209:2014 Строительная фурнитура. Замки и задвижки. Механические замки, задвижки и замковые пластины. Требования и методы испытаний (EN 12209:2003, EN 12209:2003/АС:2005, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

МІНІСТЕРСТВО ЕКОНОМІЧНОГО РОЗВИТКУ І ТОРГІВЛІ УКРАЇНИ

Наказ від 30.12.2014 № 1494

EN 12209:2003

Building hardware. Locks and latches. Mechanically operated locks, latches and locking plates. Requirements and test methods

прийнято як національний стандарт
методом «підтвердження» за позначенням

ДСТУ EN 12209:2014
(EN 12209:2003, EN 12209:2003/АС:2005, IDT)

Будівельна фурнітура. Замки та засувки. Механічні замки, засувки та замкові пластини. Вимоги та методи випробування

З наданням чинності від 2016-01-01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

1 Scope

2 Normative references

3 Terms, definitions, symbols and units

3.1 Terms and definitions

3.2 Symbols, units and abbreviated terms

4 Classification

4.1 General

4.2 Classification for mechanically operated locks, latches and locking plates

5 Requirements

5.1 General

5.2 Category of use

5.3 Durability

5.4 Door mass and closing force

5.5 Suitability for use on fire/smoke doors

5.6 Safety

5.7 Corrosion resistance and temperature

5.8 Security

5.9 Field of door application

5.10 Type of key operation and locking

5.11 Type of spindle operation

5.12 Key identification requirement

6 Test methods

6.1 General

6.2 Category of use

6.3 Durability

6.4 Door mass and closing force

6.5 Suitabilty for use on fire/smoke doors

6.6 Safety

6.7 Corrosion resistance and temperature

6.8 Security

6.9 Field of door application

6.10 Type of key operation and locking

6.11 Spindle operation

6.12 Key identification

7 Marking

8 Evaluation of conformity

8.1 Initial type test

8.2 Factory production control

8.3 Further testing of samples

Annex A (normative) Fire resistance requirement

Annex В (normative) Illustration of test apparatus for locks and latches

Annex C (normative) Test sampling and sequencing for locks and latches

Annex D (informative) Field of door application

Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (89/106/EEC)

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online