ДСТУ EN ISO 19353:2016 Безопасность машин. Предотвращение пожара и противопожарная защита (EN ISO 19353:2016, IDT; ISO 19353:2015, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 28.10.2016 № 350

EN ISO 19353:2016

Safety of machinery — Fire prevention and fire protection
(ISO 19353:2015)

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN ISO 19353:2016
 (EN ISO 19353:2016, IDT; ISO 19353:2015, IDТ)

Безпечність машин. Запобігання пожежі та протипожежний захист

З наданням чинності від 2016-11-01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Fire hazards

4.1 General

4.2 Combustible materials

4.3 Oxidizers

4.4 Ignition sources

5 Strategy for fire risk assessment and risk reduction

5.1 General

5.2 Determination of the limits of the machinery

5.3 Identification of fire hazards

5.4 Risk estimation

5.5 Risk evaluation

5.6 Risk reduction

5.6.1 General

5.6.2 Inherently safe design measures

5.6.3 Safeguarding

5.6.4 Complementary protective measures

6 Procedure for the selection of complementary protective measures

6.1 General

6.1.1 Use of the procedure

6.1.2 Determination of the residual risk level

6.1.3 Specification of requirements for the choice of fire detection and fire suppression system

6.1.4 Specification of safety and performance requirements

6.1.5 Selection of system parts and suitable fire-extinguishing agent

6.1.6 Decision on the need for further complementary protective measures

6.1.7 Validation

6.2 Selection of the fire prevention and protection system in relation to the expected risk level

6.2.1 General

6.2.3 Safety considerations

6.2.4 Selection of system parts

6.2.5 Selection of fire-extinguishing agent

6.2.6 Validation

7 Information for use

Annex A (informative) Examples of ignition sources

Annex B (informative) Examples of machines and their typical fire-related hazards

Annex C (informative) Example for the design of a fire suppression system integrated in machinery

Annex D (informative) Example for the risk assessment and risk reduction of a machining centre for the machining of metallic materials

Annex E (informative) Fire risk reduction measures

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online