ДСТУ EN 13251:2017 Геотекстиль и изделия, относящиеся к геотекстилю. Характеристики, необходимые для использования во время выполнения земляных работ, строительства фундаментов и подпорных конструкций (EN 132...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
 (З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 07.08.2017 № 210

 EN 13251:2016

Geotextiles and geotextile-related products – Characteristics required
 for use in earthworks, foundations and retaining structures

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13251:2017
(EN 13251:2016, IDT)

Геотекстиль та вироби, що належать до геотекстилю. Характеристики,
потрібні для використання під час виконання земляних робіт,
будівництва фундаментів та підпорних конструкцій

З наданням чинності від 2017–10–01

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms, definitions and abbreviations

3.1 Terms and definitions

3.2 Abbreviations

4 Required characteristics and corresponding methods of test

4.1 General

4.2 Selection of the appropriate standard in a specific application

4.3 Characteristics relevant to specific conditions of use

4.3.1 Stiffness at 2 %, 5 % and 10 %

4.3.2 Tensile strength of seams and joints

4.3.3 Static puncture

4.3.4 Friction characteristics

4.3.5 Tensile creep

4.3.6 Resistance to damage during installation

4.3.7 Water permeability normal to the plane

4.4 Release of dangerous substances

5 Assessment and verification of constancy of performance (AVCP)

5.1 General

5.2 Presentation of characteristics

5.3 Product type determination (PTD)

5.4 Factory production control (FPC)

5.5 Verification of values

5.6 Initial inspection of factory and of FPC

5.7 Continuous surveillance of FPC

6 Marking

Annex A (normative) Factory production control (FPC)

A.1 Factory production control scheme

A.1.1 General

A.1.2 Product design

A.1.3 Production

A.1.4 Finished products

A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate)

A.2 Assessment of a factory production control (FPC) system

A.2.1 General

A.2.2 Checklist

A.2.3 Test frequency

Annex B (normative) Durability aspects

B.1 General

B.1.1 Service life

B.1.2 Initial and repeat testing of durability

B.1.3 Use of rework material

B.2 Weathering (all products)

B.3 Products used in non-reinforcing applications and with service lives up to 5 years

B.4 Other applications and service lives up to 25 years, 50 years and 100 years

B.4.1 General

B.4.2 Tests for specific materials

Annex C (informative) Guidelines for the selection of the appropriate standard in a specific application

Annex D (informative) Significant technical changes to superseded versions of this standard

Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation

ZA.1 Scope and relevant characteristics

ZA.2 Procedure for AVCP of Geotextiles and geotextiles-related products for the use in the construction of earthworks, foundations and retaining structures

ZA.2.1 Systems of AVCP

ZA.2.2 Declaration of performance (DoP)

ZA.3 CE marking and labelling

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online