ДСТУ EN ISO 7500-1:2017 Материалы металлические. Калибровка и поверка машин для статических одноосных испытаний. Часть 1. Испытательные машины на растяжение и сжатие. Калибровка и поверка силоизмерительных си...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 19.08.2017 № 244

EN ISO 7500-1:2015

Metallic materials — Calibration and verification of static uniaxial testing machines —
Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
(ISO 7500-1:2015)

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN ISO 7500-1:2017
(EN ISO 7500-1:2015, IDT; ISO 7500-1:2015, IDT)

 Матеріали металеві. Калібрування - та повірка машин для статичних одновісних випробувань.
Частина 1. Випробувальні машини на розтягування та стиснення. Калібрування та повірка силовимірювальних систем

З наданням чинності від 2017-10-01

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and their meanings

5 General inspection of the testing machine

6 Calibration of the force-measuring system of the testing machine

6.1 General

6.2 Determination of the resolution

6.2.1 Analogue scale

6.2.2 Digital scale

6.2.3 Variation of readings

6.2.4 Unit

6.3 Prior determination of the relative resolution of the force indicator

6.4 Calibration procedure

6.4.1 Alignment of the force-proving instrument

6.4.2 Temperature compensation

6.4.3 Conditioning of the testing machine and force-proving instrument

6.4.4 Procedure

6.4.5 Application of discrete forces

6.4.6 Verification of accessories

6.4.7 Verification of the effect of differences in piston positions

6.4.8 Determination of relative reversibility error

6.5 Assessment of the force indicator

6.5.1 Relative indication error

6.5.2 Relative repeatability error

6.5.3 Agreement between two force-proving instruments

7 Class of testing machine range

8 Verification report

8.1 General

8.2 General information

8.3 Results of verification

9 Intervals between verifications

Annex A (normative) General inspection of the testing machine

Annex B (informative) Inspection of the loading platens of the compression testing machines

Annex C (informative) Uncertainty of the calibration results of the force-measuring system

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online