ДСТУ EN 13674-2:2015 Железнодорожный транспорт. Колея. Железная дорога. Часть 2. Стрелки и переезды, использующие рельсы в сочетании с железнодорожными рельсами Вигноле 46 кг/м и выше (EN 13674-2:2006+A1:2010...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр проблем
стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 25.12.2015 № 205

EN 13674-2:2006+A1:2010

Railway applications - Track - Rail - Part 2: Switch and crossing
rails used in conjunction with Vignole railway rails 46 kg/m and above

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13674-2:2015
(EN 13674-2:2006+A1:2010, IDT)

Залізничний транспорт. Колія. Залізниця.
Частина 2. Стрілки та переїзди, які використовують рейки
у поєднанні з залізничними рейками Вігноле 46 кг/м і вище

З наданням чинності від 2016–01–01 

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Information to be supplied by the purchaser

5 Steel grades

6 Dimensions, static properties, linear mass and tolerances

7 Manufacture

7.1 Product integrity

7.1.1 Factory production control

7.1.2 Best practice manufacture

7.2 Blooms

7.3 Rails

7.4 Identification

7.4.1 Branding

7.4.2 Hot stamping

7.4.3 Cold stamping

7.4.4 Other identification

8 Qualification of the manufacturer

9 Acceptance tests

9.1 Laboratory tests

9.1.1 General

9.1.2 Chemical composition

9.1.3 Microstructure

9.1.4 Decarburisation

9.1.5 Oxide cleanness

9.1.6 Sulfur prints

9.1.7 Hardness

9.1.8 Tensile tests

9.1.9 Retest procedures

9.2 Dimension tolerances

9.2.1 Profile

9.2.2 Straightness, surface flatness and twist

9.2.3 Cutting and drilling

9.3 Gauges

9.4 Inspection for internal quality and surface quality

9.4.1 Internal quality

9.4.2 Surface quality

Annex A (normative) Rail profiles

Annex B (informative) Comparison of steel designations referred to in this standard compared to those in EN 10027-1 and EN 10027-2

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online