ДСТУ EN 60269-1:2015 Предохранители плавкие низковольтные. Часть 1. Общие технические требования (EN 60269-1:2007, IDT). С изменениями № 1, 2

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 12.02.2016 № 34

EN 60269-1:2007

Low-voltage fuses - Part 1: General requirements

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 60269-1:2015
(EN 60269-1:2007, IDT)

Запобіжники плавкі низьковольтні. Частина 1. Загальні технічні вимоги

З наданням чинності від 2016-01-01

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 12.02.2016 № 34

EN 60269-1:2007/A1:2009

Low-voltage fuses - Part 1: General requirements

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 60269-1:2015/Зміна № 1:2015
(EN 60269-1:2007/A1:2009, IDT

Запобіжники плавкі низьковольтні. Частина 1. Загальні технічні вимоги

З наданням чинності від 2016-01-01

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
 (З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 12.02.2016 № 34

EN 60269-1:2007/A2:2014

Low-voltage fuses - Part 1: General requirements

прийнято як національний стандарт
 методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 60269-1:2015/Зміна № 2:2015
 (EN 60269-1:2007/A2:2014, IDT)

Низьковольтні запобіжники. Частина 1. Загальні вимоги

З наданням чинності від 2016-01-01

Contents

Foreword

Foreword to amendment A2

Introduction

1 General

1.1 Scope and object

1.2 Normative references

2 Terms and definitions

2.1 Fuses and their component parts

2.2 General terms

2.3 Characteristic quantities

3 Conditions for operation in service

3.1 Ambient air temperature (Ta)

3.2 Altitude

3.3 Atmospheric conditions

3.4 Voltage

3.5 Current

3.6 Frequency, power factor and time constant

3.7 Conditions of installation

3.8 Utilization category

3.9 Discrimination of fuse-links

4 Classification

5 Characteristics of fuses

5.1 Summary of characteristics

5.2 Rated voltage

5.3 Rated current

5.4 Rated frequency (see 6.1 and 6.2)

5.5 Rated power dissipation of a fuse-link and rated acceptable power dissipation of a fuse-holder

5.6 Limits of time-current characteristics

5.7 Breaking range and breaking capacity

5.8 Cut-off current and I2t characteristics

6 Markings

6.1 Markings of fuse-holders

6.2 Markings of fuse-links

6.3 Marking symbols

7 Standard conditions for construction

7.1 Mechanical design

7.2 Insulating properties and suitability for isolation

7.3 Temperature rise, power dissipation of the fuse-link and acceptable power dissipation of a fuse-holder

7.4 Operation

7.5 Breaking capacity

7.6 Cut-off current characteristic

7.7 I2t characteristics

7.8 Overcurrent selectivity of fuse-links

7.9 Protection against electric shock

7.10 Resistance to heat

7.11 Mechanical strength

7.12 Resistance to corrosion

7.13 Resistance to abnormal heat and fire

7.14 Electromagnetic compatibility

8 Tests

8.1 General

8.2 Verification of the insulating properties and of the suitability for isolation

8.3 Verification of temperature rise and power dissipation

8.4 Verification of operation

8.5 Verification of the breaking capacity

8.6 Verification of the cut-off current characteristics

8.7 Verification of I2t characteristics and overcurrent selectivity

8.8 Verification of the degree of protection of enclosures

8.9 Verification of resistance to heat

8.10 Verification of non-deterioration of contacts

8.11 Mechanical and miscellaneous tests

Annex A (informative) Measurement of short-circuit power factor

Annex B (informative) Calculation of pre-arcing I2t values for "gG", "gM", "gD" and "gN" fuse-links and calculation of operating I2t values at reduced voltage

Annex C (informative) Calculation of cut-off current-time characteristic

Annex D (informative) Effect of change of ambient temperature and surroundings on the performance of fuse-links

Annex E (normative) Particular requirements for fuse-bases with screwless-type terminals for external copper conductors

Annex ZA (normative) Normative references to international publications with their corresponding European publications

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online