ДСТУ EN 15635:2015 Системы складские стационарные стальные. Эксплуатация и техническое обслуживание складского оборудования (EN 15635:2008, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство «Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 03.08.2015 № 87

EN 15635:2008

Steel static storage systems - Application and maintenance of storage equipment

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 15635:2015
(EN 15635:2008, IDT)

Системи складські стаціонарні сталеві. Експлуатування та технічне обслуговування
складського устатковання

З наданням чинності від 2015–11–01

Contents

Foreword

0 Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Operational requirements

4.1 System requirements

4.2 Storage systems planning

5 Important data of relevance to the user

6 Assembly and installation

6.1 Skills required and provision of instructions

6.2 Installation quality and structural design

6.3 Aspects of installation work to be observed

7 Changes to the storage equipment configuration

8 Use of the storage equipment

8.1 General safety

8.1.1 Person responsible for storage equipment safety PRSES

8.1.2 Safe load warning notices

8.1.3 Training

8.1.4 Access to storage levels

8.2 Pallet or load carrying accessories

8.2.1 Loading

8.2.2 Pallet requirements

8.2.3 Special load make up accessories and loads

8.2.4 Precautions necessary for the use of weak pallets and pallets spanning in the incorrect direction

8.3 Unit load

8.3.1 Weight

8.3.2 Load stability

8.3.3 Unit load clearances

8.4 Unit load handling

8.4.1 Placement of loads

8.4.2 Damage to storage equipment

8.4.3 Timber pallet usage

8.4.4 Load make up accessory positioning on supports

8.4.5 Pallet positioning on the floor

8.4.6 Aisle obstructions

8.4.7 Handling on raised storage areas or on storage equipment supported floors

8.4.8 Operating aisle clearances

8.5 Placement on adjustable pallet racking

8.6 Placement in drive-in racking

8.6.1 Placement

8.6.2 Loading and unloading sequence for drive-in-racking

8.6.3 Use of drive-through racking access routes by trucks

8.7 Truck mast stiffness and floor flatness

9 Safety of storage equipment in use and evaluation of damaged components

9.1 Procedures

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online