ДСТУ EN ISO/IEC 80079-20-2:2018 Взрывоопасные среды. Часть 20-2. Характеристики материалов. Методы испытания горючей пыли (EN ISO/IEC 80079-20-2:2016, IDT; ISO/IEC 80079-20-2:2016, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 14.06.2018 № 166

EN ISO/IEC 80079-20-2:2016

Explosive atmospheres — Part 20-2: Material characteristics —
Combustible dusts test methods (ISO/IEC 80079-20-2:2016)

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN ISO/IEC 80079-20-2:2018
(EN ISO/IEC 80079-20-2:2016, IDT;
ISO/IEC 80079-20-2:2016, IDT)

Вибухонебезпечні середовища.
Частина 20-2. Характеристики матеріалів.
Методи випробування горючого пилу

З наданням чинності від 2018–06–18

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

CONTENTS

FOREWORD

1 Scope

2 Normative references

3 Terms and definitions

4 Dust sample requirements

4.1 Receipt of sample for testing

4.2 Characterisation of sample

4.3 Preparation of sample

4.4 Test conditions

5 Combustible dusts and combustible flyings determination

5.1 Test sequence

5.2 Tests to determine whether material is a combustible dust or combustible flying

6 Procedure for characterisation of combustible dust or combustible flying

7 Test methods for determination of whether a material is a combustible dust or a combustible flying

7.1 Modified Hartmann tube

7.2 20-litre sphere

7.3 Alternative method to 20-litre sphere for small test material quantities

8 Test methods for combustible dust determinations

8.1 MIT of a dust cloud

8.2 Test for MIT of dust layer

8.3 Method for determining minimum ignition energy of dust/air mixtures

8.4 Test on resistivity

9 Test report

Annex A (normative) Measurement of temperature distribution on the surface of the hot plate

Annex B (informative) Godbert-Greenwald oven (GG)

Annex C (informative) Examples of spark-generating systems

Annex D (normative) Vertical tube (modified Hartmann tube) apparatus

Annex E (informative) 20-litre sphere

Annex F (informative) BAM oven

Annex G (informative) Data for dust explosion characteristics

Annex H (informative) 1 m3 vessel

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online