ДСТУ EN 60947-5-2:2015 Устройства комплектные распределительные низковольтные. Часть 5-2. Устройства распределительных цепей и коммутационные элементы. Бесконтактные датчики (EN 60947-5-2:2007/А1:2012, IDТ)....

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 12.02.2016 № 34

EN 60947-5-2:2007/А1:2012

Low-voltage switchgear and controlgear -
Part 5-2: Control circnit devices and switching elements - Proximity switches

прийнято як зміна до національного стандарту
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 60947-5-2:2015/Зміна № 1:2015
(EN 60947-5-2:2007/А1:2012, IDТ)

Пристрої комплектні розподільчі низьковольтні.
Частина 5-2. Пристрої розподільчих кіл і комутаційні елементи. Безконтактні давачі

З наданням чинності від 2016-01-01

CONTENTS

FOREWORD

1 General

1.1 Scope and object

1.2 Normative references

2 Definitions

2.1 Basic definitions

2.2 Parts of a proximity switch

2.3 Operation of a proximity switch

2.4 Switching element characteristics

3 Classification

3.1 Classification according to sensing means

3.2 Classification according to the mechanical installation

3.3 Classification according to the construction form and size

3.4 Classification according to switching element function

3.5 Classification according to type of output

3.6 Classification according to method of connection

4 Characteristics

4.1 Summary of characteristics

4.2 Operating conditions

4.3 Rated and limiting values for the proximity switch and switching element(s)

4.4 Utilization categories for the switching element

5 Product information

5.1 Nature of information - Identificatoin

5.2 Marking

5.3 Instructions for installation, operation and maintenance

6 Normal service, mounting and transport conditions

6.1 Normal service conditions

6.2 Conditions during transport and storage

6.3 Mounting

7 Constructional and performance requirements

7.1 Constructional requirements

7.2 Performance requirements

7.3 Physical dimensions

7.4 Shock and vibration

8 Tests

8.1 Kinds of tests

8.2 Compliance with constructional requirements

8.3 Performances

8.4 Testing of operating distances

8.5 Testing for the frequency of operating cycles

8.6 Verification of the electromagnetic compatibility

8.7 Test results and test report

Annex А (informative) Typical dimensions and operating distances of proximity switches

Annex В (normative) Class II proximity switches insulated by encapsulation - Requirements and tests

Annex C (normative) Additional requirements for proximity switches with integrally connected cables

Annex D (normative) Integral connectors for plug-in proximity switches

Annex E (normative) Additional requirements for proximity switches suitable for use in strong magnetic fields

Annex F (informative) Symbols for proximity switches

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online