ДСТУ EN 50131-2-2:2019 Системы тревожной сигнализации. Системы охранной сигнализации. Часть 2-2. Извещатели охранные пассивные инфракрасные (EN 50131-2-2:2017, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

 Наказ від 13.06.2019 № 154

EN 50131-2-2:2017

Alarm systems —
Intrusion and hold-up systems —
Part 2-2: Intrusion detectors —
Passive infrared detectors

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 50131-2-2:2019
(EN 50131-2-2:2017, IDT)

Системи тривожної сигналізації.
Системи охоронної сигналізації.
Частина 2-2. Сповіщувачі охоронні
пасивні інфрачервоні

З наданням чинності від 2019-08-01

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms, definitions and abbreviations

3.1 Terms and definitions

3.2 Abbreviations

4 Functional requirements

4.1 Event Processing

4.2 Detection

4.3 Operational requirement

4.4 Immunity to incorrect operation

4.5 Tamper securit

4.6 Electrical requirements

4.7 Environmental classification and conditions

5 Marking, identification and documentation

5.1 Marking and/or identification

5.2 Documentation

6 Testing

6.1 General

6.2 General test conditions

6.3 Basic detection test

6.4 Walk testing

6.5 Switch-on delay, time interval between signals and indication of detection

6.6 Self-tests

6.7 Immunity to incorrect operation

6.8 Tamper security

6.9 Electrical tests

6.10 Environmental classification and conditions

6.11 Marking, identification and documentation

Annex A (normative) Dimensions and requirements of the standardised test magnets

Annex В (normative) General testing matrix

Annex C (normative) Walk test diagrams

Annex D (normative) Procedure for calculation of average temperature difference

Annex E (informative) Basic detection target for the basic test of detection capability

Annex F (informative) Equipment for walk test velocity control

Annex G (informative) Immunity to visible and near infrared radiation - Notes on calibration of the light source

Annex H (informative) Example list of small tools

Annex I (informative) Test for resistance to re-orientation of adjustable mountings

Annex J (informative) Delta-T film adjustment Lookup table

Annex К (informative) Immunity to hot air flow fan heater setup

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online