ДСТУ EN 13445-4:2015 Сосуды, работающие под давлением без огневого подвода тепла. Часть 4. Изготовление (EN 13445-4:2014, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 25.12.2015 № 207 (у редакції наказу від 20.05.2016 № 137)

EN 13445-4:2014

Unfired pressure vessels - Part 4: Fabrication

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13445-4:2015
(EN 13445-4:2014, IDT)

Посудини, що працюють під тиском без вогневого підведення тепла. Частина 4. Виготовлення

З наданням чинності від 2016-01-01

Contents

Foreword

1 Scope

2 Normative references

3 Requirements for manufacturing and subcontracting

3.1 Manufacturing

3.2 Subcontracting

4 Materials

4.1 General

4.2 Material traceability

5 Manufacturing tolerances

5.1 Surface geometry of welds

5.2 Middle line alignment

5.3 Surface alignment

5.4 Tolerances for vessels subjected to internal pressure

5.5 Tolerances for vessels subjected to external pressure

5.6 Structural tolerances

6 Weld details

6.1 General

6.2 Vessels or parts made of more than one course

6.3 Lapped joints, joggle joints, permanent backing strips

7 Welding

7.1 General

7.2 Welding procedure specification (WPS)

7.3 Welding procedure qualification record (WPQR)

7.4 Qualification of welders and welding operators

7.5 Filler metals and auxiliary materials

7.6 Joint preparation

7.7 Execution of welded joints

7.8 Attachments, supports and stiffeners

7.9 Preheat

7.10 Permanent joints other than welding

8 Manufacture and testing of welds — Production test

8.1 General

8.2 Reference criteria

8.3 Extent of testing

8.4 Performance of tests and acceptance criteria

9 Forming of pressure parts

9.1 General

9.2 Ratio of deformation

9.3 Forming procedures

9.4 Heat treatment after forming

9.5 Sampling of formed test coupons

9.6 Tests

9.7 Visual inspection and control of dimension

9.8 Marking

9.9 Documentation

10 Post weld heat treatment (PWHT)

10.1 General

10.2 Heat treatment conditions

10.3 Method of PWHT

10.4 PWHT procedure

10.5 Mechanical properties after heat treatment

10.6 Dissimilar ferritic joints

10.7 Special materials

10.8 Heat Treatment for reasons other than welding

11 Repairs

11.1 Repairs of surface defects in the parent metal

11.2 Repair of weld defects

12 Finishing operations

Annex A (informative) Structural tolerances

Annex В (informative) Example of a sub-contractors form

Annex C (normative) Specification and approval of expansion procedures and operators

Annex Y (informative) History of EN 13445-4

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of the EU Pressure Equipment Directive 97/23/EC

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online