ДСТУ EN 12493:2019 Оборудование и комплектование для сжиженного нефтяного газа. Сварные стальные баки для сжиженного нефтяного газа. Вагон-цистерны. Конструкция и изготовление (EN 12493:2008, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 13.11.2019 2019 № 347

EN 12493:2008

LPG equipment and accessories —
Welded steel pressure vessels for LPG road tankers —
Design and manufacture

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 12493:2019
(EN 12493:2008, IDT)

Устатковання та комплектовання для зрідженого нафтового газу.
Зварні сталеві баки для зрідженого нафтового газу.
Вагон-цистерни. Конструкція та виготовлення

З наданням чинності від 2019–12–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Materials

4.1 Suitability

4.2 Pressure retaining parts

4.3 Non-pressure retaining parts

4.4 Welding consumables

4.5 Non-metallic materials (gaskets)

4.6 Inspection documents for materials

5 Tank design

5.1 Design conditions

5.2 Surge plates

5.3 Doubler plates

5.4 Stresses due to motion

5.5 Self-supporting tanks

5.6 Vacuum conditions

5.7 Tank mountings

5.8 Internal pipework

6 Openings

6.1 General

6.2 Reinforcement of openings

6.3 Threaded connections

6.4 Manhole

7 Non-pressure retaining parts

7.1 Attachment welds

7.2 Position of attachment welds

8 Workmanship and construction

8.1 General

8.2 Control of materials

8.3 Acceptable weld details

8.4 Heat treatment and forming

8.5 Welding

8.6 Post-weld heat treatment

8.7 Manufacturing tolerances

8.8 Repairs to pressure envelope and direct attachment welds

9 Construction and workmanship of internal pipework

10 Inspection and testing

10.1 General

10.2 Mechanical testing

10.3 Non-destructive testing

10.4 Non-destructive testing for welds

10.5 Qualification of non-destructive testing personnel

10.6 Visual examination of welds

10.7 Acceptance criteria

10.8 Pressure test

10.9 Capacity

11 External corrosion protection and finishing

11.1 External protection

11.2 Finishing operations

12 Marking

13 Records and documentation

13.1 Documentation obtained by the manufacturer

13.2 Records prepared by the manufacturer

13.3 Retention and supply of documents

Annex A (normative) Guidance on selection of material grades

Annex В (normative) Reference temperatures for design

Annex C (informative) Alternative reference temperatures for design

Annex D (normative) Design

Annex E (informative) Example of joints

Annex F (normative) Allowable tolerances

Annex G (normative) Heat treatment

Annex H (informative) Typical method for measurement of shell peaking

Annex I (normative) Welding imperfections and test specimens

Annex J (informative) Choice of non-destructive test methods for welds

Annex К (normative) Hydraulic pressure test

Annex L (normative) Name plate

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online