ДСТУ EN 12977-3:2019 Системы тепловые солнечные и их составляющие. Системы, изготовленные на заказ. Часть 3. Методы эксплуатационных испытаний накопителей солнечных водонагревателей (EN 12977-3:2018, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ


ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 29.11.2019 № 383

EN 12977-3:2018

Thermal solar systems and components —
Custom built systems —
Part 3: Performance test methods
for solar water heater stores

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 12977-3:2019
(EN 12977-3:2018, IDT)

Системи теплові сонячні та їхні складники.
Системи, виготовлені на замовлення.
Частина 3. Методи експлуатаційних випробувань
накопичувачів сонячних водонагрівачів

З наданням чинності від 2020–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Store classification

6 Laboratory store testing

6.1 Requirements on the testing stand

6.2 Installation of the store

6.3 Test and evaluation procedures

7 Store test combined with a system test according to ISO 9459-5

8 Store test according to EN 12897

9 Determination of store parameters by means of “up- and down-scaling”

9.1 General

9.2 Requirements

9.3 Determination of store parameters

10 Test report

10.1 General

10.2 Description of the store

10.3 Test results

10.4 Parameters for the simulation

Annex A (normative) Store model benchmark tests

Annex B (normative) Verification of store test results

Annex C (normative) Benchmarks for the parameter identification

Annex D (informative) Requirements for the numerical store model

Annex E (informative) Determination of hot water comfort

Annex F (informative) Implementation for Ecodesign and Energy Labelling

Annex ZA (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EC) No 811/2013 aimed to be covered

Annex ZB (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EC) No 812/2013 aimed to be covered

Annex ZC (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EC) No 814/2013 aimed to be covered

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online