ДСТУ EN ISO 14122-4:2016 Безпечність машин. Постійні засоби доступу до машин. Частина 4. Стаціонарні сходи (EN ISO 14122-4:2016, IDT; ISO 14122-4:2016, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 28.10.2016 № 350

EN ISO 14122-4:2016

Safety of machinery — Permanent means of access to machinery —
Part 4: Fixed ladders (ISO 14122-4:2016)

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN ISO 14122-4:2016
(EN ISO 14122-4:2016, IDT; ISO 14122-4:2016, IDT)

Безпечність машин. Постійні засоби доступу до машин.
Частина 4. Стаціонарні сходи

З наданням чинності від 2016-11-01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Selection and design of ladder systems

4.1 General

4.1.1 Design and construction

4.1.2 Choice depending on available space

4.1.3 Spacing between the ladder and any permanent obstruction

4.2 Choice of a type fall protection device

4.2.1 Necessity of a fall protection device

4.2.2 Types of fall protection devices

4.2.3 Guidance for a risk assessment

4.3 Height of ladder flights and fall protection device

4.3.1 Limits of space

4.3.2 Ladder systems >3 000 mm and ≤10 000 mm total height, H

4.3.3 Ladder systems >10 000 mm total height, H

4.4 Platforms and landings

4.4.1 Installation of platforms at arrival and departure areas

4.4.2 Arrangement of platforms and landings for ladders with a total height, H >10 000 mm

5 Specific requirements of ladder systems

5.1 General requirements

5.1.1 Permanent action (dead load)

5.1.2 Variable action (rated load)

5.1.3 Additional loading

5.1.4 Design

5.2 Ladder with two stiles

5.2.1 Strength

5.2.2 Rungs

5.2.3 Connection of ladder and guard-rail

5.3 Ladder with one stile

5.3.1 Strength

5.3.2 Rungs

5.4 Departure and arrival areas

5.4.1 General requirements

5.4.2 Departure area (entrance)

5.4.3 Arrival area (exit)

5.4.4 Access opening

5.4.5 Trap doors

5.5 Fall protection device

5.5.1 Safety cage

5.5.2 Fall arrester

5.6 Platforms and landings

5.6.1 Access platforms

5.6.2 Intermediate and rest platforms

5.6.3 Intermediate landings

5.6.4 Moveable rest landings

5.7 Requirements on moveable parts of fixed ladders

6 Verification of safety requirements

6.1 General

6.1.1 General requirements

6.1.2 Verification of stability by calculation

6.1.3 Verification of stability by testing

6.2 Tests of fixed ladders with two stiles

6.2.1 Strength and bending of a ladder element

6.2.2 Test for safety cage

6.3 Test of ladders with one stile

6.3.1 Test of ladder elements

6.4 Test of extensions of guard-rails

7 Information for use for fixed ladders

7.1 Instruction handbook

7.1.1 General

7.1.2 Ladder systems with fall arrester

7.2 Marking of ladder systems with fall arrester

Annex A (normative) Requirements for the design of anti-climb devices

Annex B (informative) Summary of main dimensions of a fixed ladder equipped with a safety cage

Annex C (informative) Significant technical changes between this part of ISO 14122 and the previous edition

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online