ДСТУ EN 15004-1:2014 Стаціонарні системи пожежогасіння. Системи газового пожежогасіння. Частина 1. Проектування, монтування та технічне обслуговування (EN 15004-1:2008, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Наказом Міністерства економічного розвитку і торгівлі України
від 30.12.2014 № 1494

EN 15004-1:2008

en: Fixed firefighting systems - Gas extinguishing systems - Part 1:
Design, installation and maintenance (ISO 14520-1:2006, modified)

прийнято як національний стандарт методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 15004-1:2014

uk: Стаціонарні системи пожежогасіння.
Системи газового пожежогасіння.
Частина 1. Проектування, монтування та технічне обслуговування
(EN 15004-1:2008, IDT)

З наданням чинності від 2016-01-01


EUROPEAN STANDARD
 NORME EUROPEENNE
 EUROPAISCHE NORM

EN 15004-1

June 2008

ICS 13.220.20


English Version

Fixed firefighting systems - Gas extinguishing systems - Part 1:
Design, installation and maintenance (ISO 14520-1:2006,modified)

Installations fixes de lutte contre I'incendie - Installations
 d'extinction a gaz - Partie 1 : Calcul, installation et
 maintenance (ISO 14520-1:2006, modifiee)

 

Ortsfeste Brandbekampfungsanlagen - Loschanlagen mit
 gasformigen Loschmitteln - Teil 1: Planung, Installation und
 Instandhaltung (ISO 14520-1:2006, modifiziert)

This European Standard was approved by CEN on 26 April 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists In three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

 

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Use and limitations

4.1 General

4.2 Extinguishants

4.3 Electrostatic discharge

4.4 Compatibility with other extinguishants

4.5 Temperature limitations

5 Safety

5.1 Hazard to personnel

5.2 Safety precautions

5.2.1 General

5.2.2 For normally unoccupied areas

5.2.3 For unoccupiable areas

5.3 Occupiable areas

5.4 Electrical hazards

5.5 Electrical earthing

5.6 Electrostatic discharge

6 System design

6.1 General

6.2 Extinguishant supply

6.2.1 Quantity

6.2.2 Quality

6.2.3 Container arrangement

6.2.4 Storage containers

6.3 Distribution

6.3.1 General

6.3.2 Piping

6.3.3 Fittings

6.3.4 Pipe and valve supports

6.3.5 Valves

6.3.6 Nozzles

6.3.7 Pressure reducing orifice assembly

6.4 Detection, actuation and control systems

6.4.1 General

6.4.2 Automatic detection

6.4.3 Operating devices

6.4.4 Control equipment

6.4.5 Operating alarms and indicators

6.4.6 Stop devices

7 Extinguishant

7.1 General

7.2 Specifications, plans and approvals

7.2.1 Specifications

7.2.2 Working documents

7.3 System flow calculations

7.3.1 General

7.3.2 Balanced and unbalanced system

7.3.3 Friction losses

7.3.4 Pressure drop

7.3.5 Valves and fittings

7.3.6 Piping length

7.3.7 Drawings

7.3.8 Liquefied gases - Specific requirements

7.4 Enclosures

7.5 Extinguishant concentration requirements

7.5.1 Flame extinguishment

7.6 Total flooding quantity

7.6.1 General

7.6.2 Liquefied gases

7.6.3 Non-liquefied gas

7.7 Altitude adjustment

7.8 Duration of protection

7.9 System performance

7.9.1 Discharge time

7.9.2 Extended discharge

8 Commissioning and acceptance

8.1 General

8.2 Tests

8.2.1 General

8.2.2 Enclosure check

8.2.3 Review of mechanical components

8.2.4 Review of enclosure integrity

8.2.5 Review of electrical components

8.2.6 Preliminary functional tests

8.2.7 System functional operational test

8.2.8 Remote monitoring operations (if applicable)

8.2.9 Control panel primary power source

8.2.10 Completion of functional tests

8.3 Completion certificate and documentation

9 Inspection, maintenance, testing and training

9.1 General

9.2 Inspection

9.2.1 General

9.2.2 Container

9.2.3 Hose

9.2.4 Enclosures

9.3 Maintenance

9.3.1 General

9.3.2 User's programme of inspection

9.3.3 Service schedule

9.4 Training

Annex A (normative) Working documents

A.1 General

A.2 Working documents

A.3 Specific details

A.3.1 Pre-engineered systems

A. 3.2 Engineered systems

Annex В (normative) Determination of flame-extinguishing concentration of gaseous extinguishants by the cup burner method

B. 1. General

B.2 Principle

B.3 Requirements for apparatus

B.3.1 General

B.3.2 Cup

B.3.3 Chimney

B.3.4 Diffuser

B.3.5 Fuel supply

B.3.6 Manifold

B.3.7 Air supply

B.3.8 Extinguishant supply

B.3.9 Delivery system

B.4 Requirements for materials

B.4.1 Air

B.4.2 Fuel

B.4.3 Extinguishant

B.5 Procedure for flammable liquids

B.6 Procedure for flammable gases

B.7 Extinguishant extinguishing concentration

B.7.1 Preferred method

B.7.2 Alternative method

B. 8 Reporting of results

Annex С (normative) Fire extinguishment/area coverage fire test procedure for engineered and pre-engineered extinguishing units

C. 1 Requirements

C.2 Type of test

C.3 Extinguishing system

C.4 Extinguishing concentration

C.5 Nozzle distribution verification tests

C.5.1 Nozzles minimum height/maximum area coverage test

C.5.2 Nozzles maximum height test

C.6 Extinguishing concentration tests

C.6.1 Wood crib test

C.6.2 Heptane pan test

C. 6.3 Polymeric sheet fire test

Annex D (normative) Method of evaluating inerting concentration of a fire extinguishant

D. 1 General

D.2 Principle

D.3 Apparatus

D.4 Procedure

D. 5 Inerting concentration

Annex E (normative) Door fan test for determination of minimum hold time

E. 1 General

E.2 Test for determination of predicted hold time

E.2.1 Principle

E.2.2 Apparatus

E.2.3 Calibration and accuracy of apparatus

E.2.4 Preliminary preparation

E.2.5 Evaluation of enclosure

E.2.6 Measurement of enclosure

E.2.7 Test procedure

E.2.8 Calculation

E.3 Treatment of enclosures with predicted hold times less than the recommended value

E.3.1 General

E.3.2 Leakage areas

E.3.3 Improved sealing of the enclosure

E.3.4 Quantification and location of leaks

E.4 Report

Annex F (informative) System performance verification

Annex G (informative) Safe personnel exposure guidelines

G.1 General

G.2 Safety

G.3 Hazards to Personnel

G.3.1 Agent itself

G.3.2 Noise

G.3.3 Turbulence

G.3.4 Low temperature

G.4 Halocarbon agents

G.4.1 Toxicity of halocarbons (liquefied gases)

G.4.2 PBPK Model

G.4.3 Safe exposure guidelines for halocarbons

G.5 Inert Gas (non-liquefied gas)

G.5.1 Physiological effects of inert gas agents

G. 5.2 Safe exposure guidelines for inert gas agents 96

Annex H (informative) Flow calculation implementation method and flow calculation verification and testing for approvals

H. 1 General

H.2 Calculation method implementation

H.3 Minimum accuracy recommendations

H.3.1 Physical quantities

H.3.2 Recommended design limits to be included inside the flow calculation method (software)

H.4 Recommended testing procedure for system flow calculation method (software) validation

H.4.1 General

H.4.2 System design for testing

H.5 Pass/fail criteria

Bibliography

 

Foreword

This document (EN 15004-1:2008) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn at the latest by December 2008.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

The text of the International Standard ISO 14520-1:2006 from Technical Committee ISO/TC 21 "Equipment for fire protection and fire fighting" of the International Organization for Standardization (ISO) has been taken over as a European Standard by Technical Committee CEN/TC 191 "Fixed firefighting systems", the secretariat of which is held by BSI, with common modifications which are indicated by a straight line in the margin of the text. Where the text in ISO 14520-1 gives the reference to "ISO 14520-1" or "this part of ISO 14520" this document refers only to "this document" and is not marked by a straight line.

This European Standard will consist of the following parts, under the general title "Fixed firefighting systems - Gas extinguishing systems":

- Part 1: Design, installation and maintenance (ISO 14520-1, modified)

- Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5, modified)

- Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14520-6, modified)

- Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8, modified)

- Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9, modified)

- Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10, modified)

- Part 7; Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12, modified)

- Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13, modified)

- Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14, modified)

- Part 10: Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15, modified)

ISO 14520-1:2006 has the following foreword:

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 14520-1 was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire fighting, Subcommittee SC 8, Gaseous media and firefighting systems using gas.

This second edition cancels and replaces the first edition (ISO 14620-1:2000), which has been technically revised.

Annex С has been extensively revised to include polymeric sheet fuel array fire tests [polymethyl methacrylate (PMMA)], [polypropylene (PP)] and [acrylonitrile-butadiene-styrene (ABS)]. These tests are designed to more closely represent plastic fuel hazards such as may be encountered in information technology, telecommunications and process control facilities.

Annex E has been re-structured to accommodate lighter-than-air gases and to provide means for dealing with non-standard (as opposed to geometrically regular) hazard enclosures.

Also incorporated in this revision of ISO 14520-1 are safe personnel exposure guidelines, Annex G, recognizing physiologically based pharmacokinetic (PBPK) modelling and hypoxic guidelines to define safe human exposure limits.

ISO 14520 consists of the following parts, under the general title Gaseous media fire extinguishing systems - Physical properties and system design:

- Part 1: General requirements

- Part 2: CF3I extinguishant

- Part 5: FK-5-1-12 extinguishant

- Part 6: HCFC Blend A extinguishant

- Part 8: HFC 125 extinguishant

- Part 9: HFC 227ea extinguishant

- Part 10: HFC 23 extinguishant

- Part 11: HFC 236fa extinguishant

- Part 12 IG-01 extinguishant

- Part 13: IG-100 extinguishant

- Part 14: IG-55 extinguishant

- Part 15: IG-541 extinguishant

Parts 3, 4 and 7, which dealt with FC-2-1-8, FC-3-1-10 and HCFC 124 extinguishants, respectively, have been withdrawn, as these types are no longer manufactured.

 

Introduction

Fire fighting systems covered in this document are designed to provide a supply of gaseous extinguishing medium for the extinction of fire.

Several different methods of supplying extinguishant to, and applying it at, the required point of discharge for fire extinction have been developed in recent years, and there is a need for dissemination of information on established systems and methods. This document has been prepared to meet this need.

In particular, new requirements to eliminate the need to release extinguishants during testing and commissioning procedures are included. These are linked to the inclusion of enclosure integrity testing.

The requirements of this document are made in the light of the best technical data known to the working group at the time of writing but, since a wide field is covered, it has been impracticable to consider every possible factor or circumstance that might affect implementation of the recommendations.

It has been assumed in the preparation of this document that the execution of its provisions is entrusted to people appropriately qualified and experienced in the specification, design, installation, testing, approval, inspection, operation and maintenance of systems and equipment, for whose guidance it has been prepared, and who can be expected to exercise a duty of care to avoid unnecessary release of extinguishant.

Attention is drawn to the Montreal Protocol on substances that deplete the ozone layer.

It is important that the fire protection of a building or plant be considered as a whole. Gaseous extinguishant systems form only a part, though an important part, of the available facilities, but it should not be assumed that their adoption necessarily removes the need to consider supplementary measures, such as the provision of portable fire extinguishers or other mobile appliances for first aid or emergency use, or to deal with special hazards.

Gaseous extinguishants have for many years been a recognized effective medium for the extinction of inflammable liquid fires and fires in the presence of electrical and ordinary Class A hazards, but it should not be forgotten, in the planning of comprehensive schemes, that there may be hazards for which these media are not suitable, or that in certain circumstances or situations there may be dangers in their use requiring special precautions.

Advice on these matters can be obtained from the appropriate manufacturer of the extinguishant or the extinguishing system. Information may also be sought from the appropriate fire authority, the health and safety authorities and insurers. In addition, reference should be made as necessary to other national standards and statutory regulations of the particular country.

It is essential that fire fighting equipment be carefully maintained to ensure instant readiness when required. Routine maintenance is liable to be overlooked or given insufficient attention by the owner of the system. It is, however, neglected at peril to the lives of occupants of the premises and at the risk of crippling financial loss. The importance of maintenance cannot be too highly emphasized. Installation and maintenance should only be done by qualified personnel.

Inspection preferably by a third party should include an evaluation that the extinguishing system continues to provide adequate protection for the risk (protected zones as well as state of the art can change over time).

The test protocol contained in Annex С of this document was developed by a special working group of ISO/ТС 21/SC 8. Annex С deals with the tests for determination of the extinguishing concentrations and system performance and they are designed in such a way to allow individual installers to use his/her system and carry out all of the extinguishing tests. The need for the tests presented in Annex С was established by the fact that the previously used Class A fire test involved wood crib, heptane pan and heptane can test fires in an enclosure of minimum 100 m3, and did not necessarily indicate extinguishing concentrations suitable for the protection of plastic fuel hazards such as may be encountered in information technology, telecommunications and process control facilities.

As a consequence of the above, the current Annex С of this document has been revised as described in the Foreword.

 

1 Scope

This document specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plants or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium.

It covers total flooding systems primarily related to buildings, plants and other specific applications, utilizing electrically non-conducting gaseous fire extinguishants that do not leave a residue after discharge and for which there are sufficient data currently available to enable validation of performance and safety characteristics by an appropriate independent authority. This document is not applicable to explosion suppression.

This document is not intended to indicate approval of the extinguishants listed therein by the appropriate authorities, as other extinguishants may be equally acceptable. CO2 is not included as it is covered by other International Standards.

This document is applicable to the extinguishants listed in Table 1. It is intended to be used in conjunction with the separate parts of EN 15004 for specific extinguishants, as cited in Table 1.

Table 1 -Listed extinguishants

Extinguishant

Chemical

Formula

CAS No.

EN

FK-5-1-12

Dodecafluoro-2-methylpentan-3-one

CF3CF2C(0)CF(CF3)2

756-13-8

15004-2

HCFC Blend A

HCFC-123

HCFC-22

HCFC-124

Dichlorotrifluoroethane Chlorodifluoromethane Chlorotetrafluoroethane lsopropenyl-1 -methylcyciohexene

chci2cf3

chcif2

CHCIFCF3

Сюн

306-83-2

75-45-6

2837-89-0

5989-27-5

15004-3

HFC 125

Pentafluoroethane

CHF2CF3

354-33-6

15004-4

HFC 227ea

Heptafluoropropane

CF3CHFCF3

2252-84-8

15004-5

HFC 23

Trifluoromethane

CHF3

75-46-7

15004-6

IG-01

Argon

Ar

74040-37-1

15004-7

IG-100

Nitrogen

N2

7727-37-9

15004-8

IG-55

Nitrogen (50 %) Argon (50 %)

N2

Ar

7727-37-9

74040-37-1

15004-9

IG-541

Nitrogen (52 %) Argon (40 %)

Carbon dioxide (8 %)

N2

Ar

C02

7727-37-9

74040-37-1

124-38-9

15004-10

 

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

EN 2, Classification of fires

EN 54 (all parts), Fire detection and fire alarm systems

EN 12094-1, Fixed firefighting systems - Components for gas extinguishing systems - Part 1:Requirements and test methods for electrical automatic control and delay devices

EN 12094-2, Fixed firefighting systems - Components for gas extinguishing systems - Part 2:Requirements and test methods for non-electrical automatic control and delay devices

EN 12094-3, Fixed firefighting systems - Components for gas extinguishing systems - Part 3:Requirements and test methods for manual triggering and stop devices

EN 12094-4, Fixed firefighting systems - Components for gas extinguishing systems - Part 4:Requirements and test methods for container valve assemblies and their actuators

EN 12094-5, Fixed firefighting systems - Components for gas extinguishing systems - Part 5:Requirements and test methods for high and low pressure selector valves and their actuators

EN 12094-6, Fixed firefighting systems - Components for gas extinguishing systems - Part 6:Requirements and test methods for non-electrical disable devices

EN 12094-7, Fixed firefighting systems - Components for gas extinguishing systems - Part 7:Requirements and test methods for nozzles for C02 systems

EN 12094-8, Fixed firefighting systems - Components for gas extinguishing systems - Part 8:Requirements and test methods for connectors

EN 12094-10, Fixed firefighting systems - Components for gas extinguishing systems - Part 10:Requirements and test methods for pressure gauges and pressure switches

EN 12094-11, Fixed firefighting systems - Components for gas extinguishing systems - Part 11:Requirements and test methods for mechanical weighing devices

EN 12094-13, Fixed firefighting systems - Components for gas extinguishing systems - Part 13:Requirements and test methods for check valves and non-return valves

EN 15004-2:2008, Fixed firefighting systems - Gas extinguishing systems - Part 2:Physical properties and system design of gas extinguishing systems for FK-5-1-12, extinguishant (ISO 14520-5, modified)

EN 15004-3:2008, Fixed firefighting systems - Gas extinguishing systems - Part 3:Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant (ISO 14250-6, modified)

EN 15004-4,:2008 Fixed firefighting systems - Gas extinguishing systems - Part 4:Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8, modified)

EN 15004-5:2008, Fixed firefighting systems - Gas extinguishing systems - Part 5:Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 14520-9, modified)

EN 15004-6:2008, Fixed firefighting systems - Gas extinguishing systems - Part 6:Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10, modified)

EN 15004-7:2008, Fixed firefighting systems - Gas extinguishing systems - Part 7:Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12, modified)

EN 15004-8:2008, Fixed firefighting systems - Gas extinguishing systems - Part 8:Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13, modified)

EN 15004-9:2008, Fixed firefighting systems - Gas extinguishing systems - Part 9:Physical properties and system design of gas extinguishing systems forlG-55 extinguishant (ISO 14520-14, modified)

EN 15004-10:2008, Fixed firefighting systems - Gas extinguishing systems - Part 10:Physical properties and system design of gas extinguishing systems for IG-541 extinguishant (ISO 14520-15, modified)

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online