ДСТУ EN 1564:2015 Литво. Чавун ковкий ізотермічно загартований. Технічні умови (EN 1564:2011, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ


ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 25.12.2015 № 207
(у редакції наказу від 20.05.2016 № 137)
Наказ від 17.09.2019 № 283

EN 1564:2011

Founding — Ausferritic spheroidal graphite cast irons

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 1564:2015
(EN 1564:2011, IDT)

Литво.
Чавун ковкий ізотермічно загартований.
Технічні умови

З наданням чинності від 2016-01-01
Поновлено чинність від 2019-09-20

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Designation

5 Order information

6 Manufacture

7 Requirements

7.1 General

7.2 Test pieces machined from cast samples

7.3 Test pieces machined from samples cut from a casting

7.4 Hardness

7.5 Graphite structure

7.6 Matrix structure

8 Sampling

8.1 General

8.2 Cast samples

8.3 Samples cut from a casting

9 Test methode

9.1 Tensile test

9.2 Impact test

9.3 Hardness test

9.4 Graphite and matrix structure examination

10 Retests

10.1 Need for retest

10.2 Test validity

10.3 Non-conforming test results

10.4 Heat treatment of samples and castings

11 Inspection documentation

Annex A (normative) Abrasion resistant grades of ausferritic spheroidal graphite cast iron

Annex В (informative) Comparison of ausferritic spheroidal graphite cast iron material designations according to EN 1560 and ISO/TR 15931 [2] [7]

Annex C (informative) Guidance values for tensile strength and elongation for test pieces machined from samples cut from a casting

Annex D (informative) Guidance values for Brinell hardness

Annex E (informative) Determination of the hardness range

Annex F (informative) Nodularity

Annex G (normative) Sectioning procedure for cast samples

Annex H (informative) Un-notched impact test

Annex I (informative) Additional information on mechanical and physical properties

Annex J (informative) Machinability of ausferritic spheroidal graphite cast irons

Annex К (informative) Significant technical changes between this European Standard and the previous edition

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online