ДСТУ EN ISO 14120:2016 Безпечність машин. Захисні огорожі. Основні вимоги до проектування і конструкції нерухомих і знімних захисних огорож (EN ISO 14120:2015, IDT; ISO 14120:2015, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 08.07.2016 № 204

EN ISO 14120:2015

Safety of machinery — Guards — General requirements for the design
and construction of fixed and movable guards
(ISO 14120:2015)

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN ISO 14120:2016
(EN ISO 14120:2015, IDT; ISO 14120:2015, IDT)

Безпечність машин. Захисні огорожі. Основні вимоги до проектування
 і конструкції нерухомих і знімних захисних огорож

З наданням чинності від 2016-07-13

Contents

Foreword

Introduction

1 Scope

2 N ormative references

3 Terms and definitions

4 Risk assessment

5 General requirements for the design and construction of guards

5.1 Machine aspects

5.1.1 General

5.1.2 Access to hazard zones

5.1.3 Containment of ejected parts and other impacts

5.1.4 Containment of hazardous substances

5.1.5 Noise

5.1.6 Radiation

5.1.7 Potentially explosive atmosphere

5.2 Human aspects

5.2.1 General

5.2.2 Safety distances

5.2.3 Control of access to the hazard zone

5.2.4 Viewing

5.2.5 Ergonomic aspects

5.2.6 Intended use

5.3 Guard design and construction aspects

5.3.1 General

5.3.2 Crushing or trapping points

5.3.3 Durability

5.3.4 Hygiene

5.3.5 Cleaning

5.3.6 Exclusion of contaminants

5.3.7 Sharp edges, etc

5.3.8 Integrity of joints

5.3.9 Removal of fixed guards

5.3.10 Mounting of removable fixed guards

5.3.11 Adjustable guards

5.3.12 Movable guards

5.3.13 Closed position of movable guards

5.3.14 Interlocking guards with a start function (control guards)

5.4 Materials, rigidity, and impact requirements

5.4.1 General

5.4.2 Impact and ejection resistance

5.4.3 Rigidity

5.4.4 Secure fixing

5.4.5 Reliability of moving parts

5.5 Containment

5.6 Resistance to corrosion

5.7 Resistance to microorganisms

5.8 Non-toxicity

5.9 Machine viewing

5.10 Transparency

5.11 Shadows and stroboscopic effects

5.12 Electrostatic properties

5.13 Guards with electrically conductive parts

5.14 Thermal stability

5.15 Fire and flammability

5.16 Noise and vibration reduction

5.17 Radiation protection

5.18 Climbing

5.19 Retained fastenings

5.20 Vibration resistance

5.21 Warning signs

5.22 Colour

5.23 Appearance

6 Selection of types of guards

6.1 General

6.2 Combination of different guards or of guards with other devices

6.3 Selection of guards according to the number and size of the hazards

6.4 Selection of guards according to the nature and frequency of access required

6.4.1 General

6.4.2 Moving transmission parts

6.4.3 Where access is not required during use

6.4.4 Where access is required during use

7 Verification of the safety requirements for guards

7.1 General

7.2 Verification and validation methods

7.3 Required verification and validation

8 Information for use

8.1 General

8.2 Guard hazards

8.3 Installation

8.4 Operation

8.5 Removal of guards

8.6 Inspection and maintenance

Annex A (informative] Example of retained fastening

Annex В (informative] Example of projectile test method for mechanically testing guards

Annex C (informative] Example of pendulum test method for mechanically testing guards

Annex D (informative] Relationship between International Standards referenced in Clause 2 and corresponding European Standards

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online