ДСТУ EN 10290:2016 Сталеві труби та фітинги для суходільних і морських трубопроводів. Зовнішні поліуретанові та поліуретан-модифіковані покриви рідинного нанесення (EN 10290:2002, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 30.06.2016 № 192

EN 10290:2002

Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and
polyurethane-modified coatings

прийнято як національний стандарт
методом «підтвердження» за позначенням

ДСТУ EN 10290:2016
(EN 10290:2002, IDT)

Сталеві труби та фітинги для суходільних і морських трубопроводів. Зовнішні поліуретанові та
поліуретан-модифіковані покриви рідинного нанесення

З наданням чинності від 2016–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

1 Scope

2 Normative references

3 Terms, definitions and symbols

3.1 Terms and definitions

3.2 Symbols

4 Coating materials

4.1 General

4.2 Technical specification

4.3 Packaging

4.4 Quality assurance

5 Information to be supplied by the purchaser

5.1 Mandatory

5.2 Options to be indicated by the purchaser

6 Application of the coating

6.1 Surface preparation

6.2 Composition of the coating

7 Requirements of the applied coating

7.1 General

7.2 Minimum dry thickness of the coating system

7.3 Hardness Shore "D"

7.4 Appearance and continuity

7.5 Cut back at the ends

7.6 Holiday detection

7.7 Impact resistance

7.8 Adhesion test - Resistance to removal

7.9 Adhesion test - Pull-off method

7.10 Cathodic disbondment

7.11 Specific electrical insulation resistance

7.12 Adhesion test after immersion in tap water

7.13 Indentation resistance

7.14 Thermal ageing

7.15 Flexibility

7.16 Infra-red scan

7.17 Elongation

8 Inspection

8.1 General

8.2 Documents

8.3 Sampling

8.4 Nature and frequency of testing and control

8.5 Retests

9 Repairs

10 Marking

11 Handling, transportation and storage

11.1 Handling

11.2 Transportation to the storage area

11.3 Storage

11.4 Loading of components for delivery

Annex A (normative) Dry thickness of the coating system

Annex B (normative) Holiday detection test

Annex C (normative) Impact test

Annex D (normative) Adhesion test - Resistance to removal

Annex E (normative) Cathodic disbondment test

Annex F (normative) Specific electrical insulation resistance test

Annex G (normative) Adhesion test after immersion tap water

Annex H (normative) Indentation test

Annex J (normative) Thermal ageing

Annex K (normative) Flexibility

Annex L (normative) Types of inspection documents

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online