ДСТУ EN 13823:2015 Випробування будівельних виробів щодо реакції на вогонь. Будівельні вироби, за винятком покривів для підлог, які піддають термічній дії поодинокого предмета, що горить (EN 13823:2010+А1:201...

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство «Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 24.02.2016 № 52

EN 13823:2010+А1:2014

Reaction to fire tests for building products –
Building products excluding floorings exposed to the thermal attack by a single burning item

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13823:2015
(EN 13823:2010+А1:2014, IDT)

Випробування будівельних виробів щодо реакції на вогонь. Будівельні вироби,
за винятком покривів для підлог, які піддають термічній дії поодинокого предмета, що горить

З наданням чинності від 2016–01–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Test facility

4.1 General

4.2 Test room 

4.3 Materials

4.4 Test apparatus

4.5 Smoke exhaust system

4.6 General measurement section equipment 

4.7 Other general equipment

5 Test specimen

5.1 Dimensions of specimen

5.2 Mounting of specimen 

5.2.1 Mounting as in end use application

5.2.2 Standard mounting

5.3 Installation of the specimen wings in the trolley 

5.4 Number of specimens

6 Conditioning

7 Principle

8 Test procedure

8.1 General 

8.2 Testing operations

8.3 Visual observation and manual recording of data

8.3.1 General

8.3.2 Pre-test conditions

8.3.3 Lateral flame spread on the long wing

8.3.4 Flaming particles or droplets

8.3.5 End of test conditions

8.3.6 Recorded events

8.4 Automated recording of data 

8.5 Early termination of test

9 Expression of results

10 Test report

Annex A (normative) Calculation procedures

A.1 General 

A.1.1 General remarks 

A.1.2 Calculations to be performed on the test data 

A.1.3 Calculations to be performed on calibration data

A.1.4 Standard data set

A.2 Synchronization of data 

A.3 Checking equipment response 

A.3.1 Temperature readings

A.3.2 Drift in gas concentration measurement

A.3.3 Drift in light attenuation measurement

A.4 Exposure period 

A.5 Heat output 

A.5.1 Calculation of heat release rate (HRR)

A.5.2 Calculation of THR(t) and THR600s

A.5.3 Calculation of FIGRA0,2MJ and FIGRA0,4MJ (fire growth rate indices) 

A.6 Smoke production

A.6.1 Calculation of smoke production rate (SPR) 

A.6.2 Calculation of TSP(t) and TSP600s

A.6.3 Calculation of SMOGRA (smoke growth rate index)

A.7 Calculations for calibrations – Propane heat release

Annex B (informative) Precision of test method

B.1 General remarks and results

B.2 Calculation of test results

B.3 Statistical analysis

B.4 Statistical results

Annex C (normative) Calibration procedures

C.1 Procedures for separate pieces of equipment 

C.1.1 General

C.1.2 Oxygen analyser adjustment 

C.1.3 Oxygen analyser output noise and drift

C.1.4 Carbon dioxide analyser adjustment

C.1.5 Check of propane mass flow controller

C.1.6 Light system calibration

C.2 System response calibrations

C.2.1 Burner switch response time

C.2.2 Burner heat output step calibration

C.2.3 Heptane calibration 

C.2.4 Velocity profile factor kt,v

C.2.5 Flow factor kt

Annex D (informative) Calibration procedures

D.1 Procedures for separate pieces of equipment

D.1.1 General

D.1.2 Oxygen analyser adjustment

D.1.3 Carbon dioxide analyser adjustment

D.1.4 Check of propane mass flow controller 

D.1.5 Optical filter check

D.2 Check of the thermal attack on the specimens

D.2.1 General 

D.2.2 Procedure

Annex E (normative) Design drawings 

Annex F (informative) Data file format 

Annex G (informative) Record sheet

Bibliography 

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online