ДСТУ EN 71-5:2017 Безпечність іграшок. Частина 5. Іграшкові набори, що містять хімічні речовини та не належать до наборів для проведення хімічних дослідів (EN 71-5:2015, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 30.01.2017 № 11

EN 71-5:2015

Safety of toys Part 5: Chemical toys (sets) other than experimental sets

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 71-5:2017 (EN 71-5:2015, IDT)

Безпечність іграшок. Частина 5. Іграшкові набори, що містять хімічні речовини
та не належать до наборів для проведення хімічних дослідів

З наданням чинності від 2018-04-17

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Plaster of Paris (gypsum) moulding sets

4.1 Marking

4.2 First aid information

4.3 Safety rules

5 Oven-hardening plasticised PVC modelling clay sets

5.1 Chemical substances

5.2 Marking

5.3 First aid information

5.4 Safety rules

6 Moulding sets

6.1 Polystyrene granules sets

6.1.1 Chemical substances

6.1.2 Marking

6.1.3 First aid information

6.1.4 Safety rules

6.2 Embedding sets

6.2.1 General

6.2.2 Packaging

6.2.3 Marking

6.2.4 First aid information

6.2.5 Safety rules

7 Adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents) supplied or recommended in model sets

7.1 General

7.2 Adhesives

7.2.1 Water-based adhesives

7.2.2 Solvent-based adhesives

7.3 Water-based paints or lacquers

7.3.1 General

7.3.2 Packaging

7.3.3 Marking

7.3.4 First aid information

7.3.5 Safety rules

7.4 Solvent-based paints, lacquers, thinners and cleaning solvents

7.4.1 General

7.4.2 Packaging

7.4.3 Marking

7.4.4 First aid information

7.4.5 Safety rules

8 Marking

8.1 General

8.2 Marking of the primary packaging

8.2.1 General

8.2.2 Manufacturer’s identification

8.2.3 Warning phrases

8.3 Marking of individual containers and any packagings

9 Instructions for use

9.1 General

9.2 Contents list

9.3 Advice for adult supervision

9.4 Safety rules

9.5 Instructions for carrying out the activities

9.6 Spills and disposal of chemicals

10 Test methods

10.1 General

10.2 Determination of plasticisers in oven-hardening polyvinyl chloride (PVC) modelling clay sets

10.2.1 Principle

10.2.2 Standards and reagents

10.2.3 Apparatus

10.2.4 Preparation of standard solutions

10.2.5 Sampling

10.2.6 Sample preparation

10.2.7 Procedure

10.2.8 Evaluation of results

10.2.9 Test report

10.3 Determination of the emission of benzene, toluene and xylenes from ovenhardening plasticised PVC modelling clay sets and polystyrene granules sets

10.3.1 Principle

10.3.2 Standards and reagents

10.3.3 Apparatus

10.3.4 Preparation of standard solutions

10.3.5 Sampling

10.3.6 Sample preparation

10.3.7 Procedure

10.3.8 Evaluation of results

10.3.9 Test report

10.3.10 Critical control points

10.4 Determination of styrene content in polystyrene granules

10.4.1 Principle

10.4.2 Standards and reagents

10.4.3 Apparatus

10.4.4 Preparation of the standard solutions

10.4.5 Sampling

10.4.6 Sample preparation

10.4.7 Procedure

10.4.8 Evaluation of results

10.4.9 Test report

10.5 Determination of organic solvents

10.5.1 General

10.5.2 Principle

10.5.3 Standards and reagents

10.5.4 Apparatus

10.5.5 Preparation of the standard solutions

10.5.6 Sampling

10.5.7 Sample preparation

10.5.8 Procedure

10.5.9 Evaluation of results

10.5.10 Test report

10.6 Combined approach for the determination of plasticisers in solvent-based adhesives and in solvent-based paints or lacquers, film-forming agents in paints and lacquers and modifiers in solvent-based paints or lacquers

10.6.1 Principle

10.6.2 Determination of total extract

10.6.3 Identification of nitrocellulose

10.6.4 Determination of plasticisers

10.6.5 Determination of film-forming agents

10.6.6 Determination of the modifiers

10.6.7 Test report

Annex A (normative) Environmental, health and safety precautions for using the methods of analysis

Annex B (informative) Organic solvents

Annex C (informative) Validation of test methods

Annex D (informative) Rationale

D.1 General remark

D.2 Primary packaging (4.1; 5.2; 6.1.2; 6.2.2; 7.2.1.2.2; 7.2.2.6; 7.3.2; 7.4.3; 8.2)

D.3 Minimum age (4.1; 5.2;6.1.2; 6.2.3; 7.2.1.2.3; 7.2.1.3.3; 7.2.2.6; 7.3.3; 7.4.3)

D.4 Benzene (5.1, Table 2; 7.2.2.4, Table 11; 7.4.1, Table 15)

D.5 Preservatives (6.2.1; 7.2.1.1; 7.3.1)

Annex E (informative) Significant technical changes between this European Standard and the previous version

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/48/EC

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online