ДСТУ EN 62820-1-1:2017 Системи внутрішнього зв`язку будівлі. Частина 1-1. Вимоги до систем. Загальні вимоги (EN 62820-1-1:2016, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 31.07.2017 № 201

EN 62820-1-1:2016

Building intercom systems — Part 1-1: System
requirements — General

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 62820-1-1:2017
(EN 62820-1-1:2016, IDT)

Системи внутрішнього зв’язку будівлі.
Частина 1-1. Вимоги до систем. Загальні вимоги

З наданням чинності від 2017-08-01

CONTENTS

FOREWORD

INTRODUCTION

1 Scope

2 Normative references

3 Terms, definitions and abbreviations

3.1 Terms and definitions

3.2 Abbreviations

4 Functional requirements

4.1 Basic functional requirements

4.1.1 General

4.1.2 Requirements for building intercom system with SMU

4.2 Additional functions

5 Performance requirements

5.1 Audio characteristics

5.1.1 Acoustic pressure level

5.1.2 Overall loudness rating (OLR)

5.1.3 Overall sensitivity

5.1.4 Frequency response

5.1.5 Acoustic distortion

5.1.6 Channel S/N ratio

5.1.7 Sidetone masking rating (STMR)

5.1.8 Idle channel noise

5.1.9 Ringtone sound pressure

5.1.10 Acoustic stability (Larsen effect)

5.1.11 Acoustic safety

5.2 Video characteristics

5.2.1 Image resolution

5.2.2 Gray scale

5.2.3 Focus distance

5.2.4 Color reproduction

5.2.5 Environmental illuminance adaptability

5.3 Environmental adaptability requirements

5.3.1 Environmental classes

5.3.2 Environmental adaptability

5.4 Safety requirements

5.5 Additional protection under fault conditions

5.6 Electromagnetic compatibility requirements

5.6.1 Electromagnetic compatibility immunity requirements

5.6.2 Additional electromagnetic compatibility immunity requirements

5.6.3 Electromagnetic compatibility emission requirements

5.7 Markings and mechanical structural requirements

5.7.1 Markings

5.7.2 Mechanical structure

5.7.3 Enclosure protection capability

5.7.4 Anti-vandalism

6 Test methods

6.1 Test conditions

6.1.1 Test environmental conditions

6.1.2 Electrical connection

6.2 Function test

6.3 Audio characteristics test

6.4 Video characteristics test

6.5 Environmental adaptability test

6.6 Safety test

6.7 Protection under fault conditions test

6.8 Electromagnetic compatibility test

6.8.1 Electromagnetic compatibility immunity test

6.8.2 Additional electromagnetic compatibility immunity test

6.8.3 Electromagnetic compatibility emission test

6.9 Markings and mechanical structure test

6.9.1 Markings and scrub resistance test

6.9.2 Mechanical structure test

6.9.3 Enclosure protection capability test

6.9.4 Anti-vandalism test

7 Documentation

Annex A (normative) Test of audio characteristics

A.1 Test conditions

A.2 Acoustic pressure level test

A.2.1 Methods

A.2.2 Calibration of test equipment

A.2.3 Test of the acoustic pressure level

A.3 Overall loudness rating (OLR) test

A.3.1 Measurement of sound pressure Pm at the MRP

A.3.2 Measurement of output sound pressure Po of the hands-free EUT

A.3.3 Measurement of output sound pressure Pe of the handset EUT

A.3.4 Calculations of the OLR

A.4 Overall sensitivity test

A.4.1 Test of the overall sensitivity at the hands-free EUT

A.4.2 Test of the overall sensitivity at the handset EUT

A.5 Frequency response test

A.6 Acoustic distortion test

A.7 Channel S/N ratio test

A.8 Sidetone masking rating (STMR) test

A.9 Idle channel noise test

A.10 Ringtone sound pressure test

A.11 Acoustic stability (Larsen Effect) test

A.12 Acoustic safety test

Annex B (normative) Test of video characteristics

B.1 Test conditions

B.2 Connection of the tested system

B.3 Image resolution test

B.4 Gray scale test

B.5 Focus distance test

B.6 Color reproduction test

B.7 Environmental illumination adaptability test

Annex C (normative) Different requirements between grade 1 and grade 2

Annex D (normative) Safety requirements correspondence in IEC 60065 or IEC 60950-1

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online