ДСТУ IEC 60068-2-10:2015 Випробування на вплив зовнішніх чинників. Частина 2-10. Випробування. Випробування J та настанови: Утворення плісняви (IEC 60068-2-10:2005, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 25.12.2015 № 206
IEC 60068-2-10:2005
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
прийнято як національний стандарт
методом «підтвердження» за позначенням
ДСТУ IEC 60068-2-10:2015
(IEC 60068-2-10:2005, IDT)
Випробування на вплив зовнішніх чинників. Частина 2-10. Випробування.
Випробування J та настанови: Утворення плісняви
З наданням чинності від 2016–01–01
Відповідає офіційному тексту
З питань придбання
офіційного видання звертайтесь
до
національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)
Contents
FOREWORD
1 Scope
2 Normative references
3 General description
4 Health hazards to operators
5 Description of the test variants
5.1 Test variant 1
5.2 Test variant 2
6 Reagents and materials
6.1 Cultures or spores - Supply and conditions
6.2 Preparation of spore suspension
6.3 Control strips
7 Description of test apparatus
7.1 Inoculation by spraying
7.2 Incubation of small specimens
7.3 Incubation of large specimens
8 Severities
9 Initial examinations
10 Pre-conditioning
10.1 Cleaning
10.2 Damp heat storage
11 Conditioning
11.1 Application
11.2 Inoculation
11.3 Incubation
12 Final examinations
12.1 Visual examination
12.2 Effect of growth
12.3 Extent of growth
13 Information to be given in the relevant specification
14 Information to be given in the test report as a minimum
Annex A (informative) Danger to personnel
Annex B (normative) Inoculation methods (see also 11.2)
Annex C (informative) Recommended safety precautions
Annex D (informative) Decontamination procedures
Annex E (informative) Information on the test fungi
Annex F (informative) Guidance
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».