ДСТУ EN 60051-1:2015 Прилади прямої дії електровимірювальні аналогові показувальні та допоміжні частини до них. Частина 1. Визначення та основні вимоги для всіх частин (EN 60051-1:1998, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 12.02.2016 № 34

EN 60051-1:1998

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1:
Definitions and general requirements common to all parts

прийнято як національний стандарт
методом «підтвердження» за позначенням

ДСТУ EN 60051-1:2015
(EN 60051-1:1998, IDT)

Прилади прямої дії електровимірювальні аналогові показувальні та допоміжні частини до них. Частина 1.
Визначення та основні вимоги для всіх частин

З наданням чинності від 2016–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

Introduction

1 General

1.1 Scope

1.2 Normative references

2 Definitions

2.1 General terms

2.2 Description of instruments according to their method of operation

2.3 Constructional features of instruments

2.4 Characteristic features of instruments

2.5 Characteristic values

2.6 Influence quantity, reference conditions, nominal range of use and preconditioning

2.7 Errors and variations

2.8 Accuracy, accuracy class and class index

3 Description, classification and compliance

3.1 Description

3.2 Classification

3.3 Compliance with the requirements of this standard

4 Reference conditions and intrinsic errors

4.1 Reference conditions

4.2 Limits of intrinsic error, fiducial value

5 Nominal range of use and variations

5.1 Nominal range of use

5.2 Limits of variations

5.3 Conditions for the determination of variations

6 Further electrical and mechanical requirements

6.1 Voltage tests, insulation tests and other safety requirements

6.2 Damping

6.3 Self-heating

6.4 Permissible overloads

6.5 Limiting values of temperature

6.6 Deviation from zero

7 Constructional requirements

7.1 Sealing to prevent access

7.2 Scales

7.3 Indication of out-of-range values of the measurand

7.4 Preferred values

7.5 Adjusters, mechanical and/or electrical

7.6 Effects of vibration and shock

8 Information, general markings and symbols

8.1 Information

8.2 Markings, symbols and their locations

8.3 Markings relating to the reference values and nominal ranges of use of influence quantities

9 Markings and symbols for terminals

9.1 Requirements for markings

9.2 Earthing (grounding) terminals

9.3 Measuring circuit terminals

9.4 Special markings for terminals

10 Tests to prove compliance with this standard

Annex A-1 Tests

Annex B-1 Permissible errors and variations

Annex ZA (normative) Normative references to international publications with their corresponding European publications

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online