ДСТУ EN 14509:2017 Панелі теплоізоляційні самонесійні з двобічним металевим облицюванням. Вироби заводського виготовлення. Технічні умови (EN 14509:2013, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 28.12.2017 № 489

EN 14509:2013

Self-supporting double skin metal faced insulating panels —
Factory made products — Specifications

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 14509:2017
(EN 14509:2013, IDT)

Панелі теплоізоляційні самонесійні
з двостороннім металевим облицюванням.
Вироби заводського виготовлення. Технічні умови

З наданням чинності від 2018–02–01

Contents

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Requirements, properties and test methods

5.1 Requirements for component materials

5.1.1 General

5.1.2 Metal facings

5.1.3 Core materials

5.1.4 Adhesives and bonding

5.2 Properties of panels

5.2.1 Mechanical resistance of the panel

5.2.2 Thermal transmittance

5.2.3 Durability and other long-term effects

5.2.4 Fire characteristics

5.2.5 Dimensional tolerances for sandwich panels

5.2.6 Water permeability

5.2.7 Air permeability

5.2.8 Water vapour permeability

5.2.9 Airborne sound insulation (Rw (C;Ctr))

5.2.10 Sound absorption (aw)

5.2.11 Dangerous substances

5.3 Actions and safety level requirements

5.3.1 Mechanical resistance to design loads

5.3.2 Actions and combinations of actions

6 Evaluation of conformity, testing, assessment and sampling methods

6.1 General

6.2 Initial type testing - ITT

6.2.1 Initial type evaluation

6.2.2 Existing ITT test data

6.2.3 Sampling for ITT and audit testing purposes

6.2.4 Testing and compliance criteria - ITT

6.2.5 Shortened testing programme Ц ITT (product change)

6.3 Factory Production Control (FPC)

6.3.1 General

6.3.2 Results of FPC tests

6.3.3 Equipment

6.3.4 Raw materials and components

6.3.5 Product testing and assessment - FPC

6.3.6 Conformity of Factory Production Control - supplier purchases

6.4 Characteristic values from families of tests

7 Classification and designation

8 Marking, labelling and packaging

8.1 Marking and labelling

8.2 Packaging, transport, storage and handling

Annex A (normative) Testing procedures for material properties

A.1 Cross panel tensile test

A.1.1 Principle

A.1.2 Apparatus

A.1.3 Test specimens

A.1.4 Procedure

A.1.5 Calculations and results

A.1.6 Cross panel tensile modulus at elevated temperature

A.2 Compressive strength and modulus of the core material

A.2.1 Principle

A.2.2 Apparatus

A.2.3 Test specimens

A.2.4 Procedure

A.2.5 Calculations and results

A.3 Shear test on the core material

A.3.1 Principle

A.3.2 Apparatus

A.3.3 Test specimens

A.3.4 Procedure

A.3.5 Calculations and results - short-term loading

A.3.6 Test procedures, calculations and results - long term loading

A.4 Test to determine the shear properties of a complete panel

A.4.1 Principle

A.4.2 Apparatus

A.4.3 Test specimens

A.4.4 Procedure

A.4.5 Calculations and results

A.5 Test to determine the bending moment capacity of a simply supported panel

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online