ДСТУ EN 15193-1:2017 Енергоефективність будівель. Енергетичні вимоги до освітлення. Частина 1. Технічні характеристики, Модуль М9 (EN 15193-1:2017, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
 проблем стандартизації, сертифікації та якості»
 (З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 13.12.2017 № 414

EN 15193-1:2017

Energy performance of buildings — Energy requirements for lighting —
Part 1: Specifications, Module M9

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 15193-1:2017
(EN 15193-1:2017, IDT)

Енергоефективність будівель. Енергетичні вимоги до освітлення.
Частина 1. Технічні характеристики, Модуль М9

З наданням чинності від 2017-12-15

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

4.1 Symbols and units

4.2 Subscripts

4.3 Abbreviations

5 Brief description of the method(s) and routing

5.1 Output of the method 1 - Comprehensive method

5.2 Optional methods

5.2.1 Method 2 - Quick calculation method

5.2.2 Method 3 - Direct metering method

5.3 Selection criteria between the methods

6 Method 1 - Calculation of the energy required for lighting

6.1 Output data

6.2 Calculation time interval and calculation period

6.3 Input data

6.3.1 Lighting system data

6.3.2 Product data

6.3.3 System design data

6.3.4 Operating conditions

6.3.5 Constants and physical data

6.4 Calculation procedure

6.4.1 Applicable time step

6.4.2 Operating conditions calculation

6.4.3 Energy for lighting calculation

6.5 Expenditure factors for lighting systems

7 Method 2 - Quick calculation of the energy required for lighting

7.1 Output data

7.2 Calculation time steps

7.3 Input data

7.3.1 Lighting system data

7.3.2 Luminaire data

7.3.3 System design data

7.3.4 Operating conditions

7.3.5 Constants and physical data

7.4 Calculation procedure

7.4.1 Applicable time step

7.4.2 Operating conditions calculation

7.4.3 Energy calculation

7.5 Expenditure factors for lighting systems

8 Method 3 - Metered energy used for lighting

8.1 Output data

8.2 Calculation time steps

8.3 Input data

8.4 Calculation procedure of annual energy

9 Quality control

9.1 Method 1

9.2 Method 2

9.3 Method 3

10 Compliance check

10.1 General

10.2 Method 1

10.3 Method 2

10.4 Method 3

Annex A (normative) Input and method selection data sheet — Template

A.1 General

A.2 System design data

A.2.1 General

A.2.2 Standby energy density

A.2.3 Annual operating hours

A.2.4 Daylight supply factor for vertical facades

A.2.5 Daylight supply factor for roof lights

A.2.6 Absence factor (Fa) for rooms in building types

A.2.7 Example constant illuminance dependency factors (Fc)

A.2.8 Installed power for residential buildings

A.2.9 Useful areas in residential buildings

Annex B (informative) Input and method selection data sheet — Default choices

B.1 General

B.2 Method 1

B.2.1 Luminaire description data

B.2.2 Luminaire technical data tables

B.2.3 System design data

B.3 Method 2

B.3.1 Luminaire description data

B.3.2 Luminaire technical data tables

B.3.3 System design data

B.4 Method 3

Annex C (normative) Simplified Method for Installed Power Estimation

C.1 General

C.2 Installed power assessment for non-residential buildings

C.3 Installed power assessment for residential buildings

Annex D (normative) Assessment of the installed power for lighting systems in existing buildings

Annex E (normative) Occupancy estimation

Annex F (normative) Daylight availability

F.1 General

F.2 Building segmentation: Spaces benefiting from daylight

F.3 Daylight supply factor for vertical façades

F.3.1 Daylight factor classification

F.3.2 Daylight supply factor

F.4 Daylight supply factor for roof lights

F.4.1 General

F.4.2 Daylight availability factor

F.4.3 Daylight supply factor

F.4.4 Relative times, shading activated/ not activated for roof lights

F.4.5 Daylight supply factors as function of the daylight availability classification

F.5 Daylight Responsive Control Systems

F.6 Monthly evaluation method

F.7 Determination of daytime and night time hours

F.8 Comprehensive calculation

F. 9 Collection of input data required for daylight calculations

Annex G (normative) Constant illuminance

G.1 General

G.2 Constant illuminance factor (Fc)

G.3 Constant lumen output system (CLO)

Annex H (normative) Standby system energy requirements

H.1 Emergency lighting luminaire standby charging power (Pem)

H.2 Lighting controls standby power (Ppc)

Bibliograph

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online