ДСТУ EN 16361:2018 Механізовані двері для пішоходів. Стандарт на продукцію, експлуатаційні характеристики. Дверні блоки, крім поворотних, спроектовані для установки з механізованим приводом без характеристик...

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 24.09.2018 № 336

EN 16361:2013 + A1:2016

Power operated pedestrian doors — Product standard, performance
characteristics — Pedestrian doorsets, other than swing type, initially
designed for installation with power operation

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 16361:2018
(EN 16361:2013 + А1:2016, IDT)

Механізовані двері для пішоходів. Стандарт на продукцію, експлуатаційні характеристики.
Дверні блоки, крім поворотних, спроектовані для установки з механізованим приводом
без характеристик вогнестійкості та димонепроникності

З наданням чинності від 2018–10–01

Contents

European foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Requirements

4.1 General

4.2 Rate of release of dangerous substances (only for indoor impact)

4.3 Impact resistance (only for glazed doors with injury risks)

4.4 Height

4.5 Direct airborne sound insulation index (only for uses where acoustic performance is declared)

4.6 Impact forces (safety in use)

4.7 Water tightness (only for external doors)

4.8 Resistance to wind load (only for external doors)

4.9 Thermal transmittance (only for external doors and for internal doors where the thermal insulation is declared)

4.10 Air permeability (only for external doors and for internal doors where thermal insulation is declared)

4.11 Radiation properties

4.12 Durability

4.12.1 General

4.12.2 Durability

4.13 Electromagnetic compatibility (EMC)

4.14 Other requirements

4.14.1 Glazing

4.14.2 Unframed glass doorsets

4.14.3 Doorsets in escape routes and emergency exits

4.14.4 Burglar resistance

5 Testing, assessment and sampling methods

5.1 General

5.2 Rate of release of dangerous substances (only for indoor impact)

5.3 Impact resistance (only for glazed doors with injury risks)

5.4 Height

5.5 Direct airborne sound insulation index (only for uses where acoustic performance is declared)

5.6 Impact forces (safety in use)

5.7 Water tightness (only for external doors)

5.8 Resistance to wind load (only for external doors)

5.9 Thermal transmittance (only for external doors and for internal doors where thermal insulation is declared)

5.10 Air permeability (only for external doors and for internal doors where thermal insulation is declared)

5.11 Radiation properties

5.12 Durability

5.13 Electromagnetic compatibility (EMC)

5.13.1 Verification

5.13.2 Test for electromagnetic emissions

5.13.3 Tests for Immunity to disturbances

6 F5 Assessment and verification of constancy of performance - AVCP

6.1 General

6.2 Type testing

6.2.1 General

6.2.2 Test samples, testing and compliance criteria

6.2.3 Test reports

6.2.4 Shared other party results

6.2.5 Cascading determination of the product type results

6.3 Factory production control (FPC)

6.3.1 Genera

6.3.2 Requirements

6.3.3 Product specific requirements

6.3.4 Initial Inspection of factory and of FPC

6.3.5 Continuous surveillance of FPC for products covered by AVCP system

6.3.6 Procedure for modifications

6.3.7 Onc-ofT products, pre-production products (e-g. prototypes) and products produced in very low quantity

Annex A (normative) Standards and draft standards on glass

Annex B (informative) Summary of the characteristics

B.1 Summary of the characteristics of power operated pedestrian doorsets, other than swing type, Initially designed for Installation with power operation without resistance to fire and smoke leakage characteristics

Annex C (informative) Handling, installation, maintenance and care

Annex D (Informative) Summary of classification of characteristics

Annex E (informative) Example of air permeability calculation

Annex ZA (Informative) Relationship of this European Standard with Regulation (EU)

Annex ZB (Informative) Relationship between this European Standard and the Essential Requirements of the EMC Directive

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online