ДСТУ EN 13384-1:2018 Конструкції для видалення димових газів. Теплотехнічний та аеродинамічний розрахунок. Частина 1. Конструкції для видалення димових газів від одного джерела тепла (EN 13384-1:2015, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 17.12.2018 № 498

EN 13384-1:2015

Chimneys — Thermal and fluid dynamic calculation methods —
Part 1: Chimneys serving one heating appliance

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 13384-1:2018
(EN 13384-1:2015, IDT)

Конструкції для видалення димових газів. Теплотехнічний та аеродинамічний розрахунок.
Частина 1. Конструкції для видалення димових газів від одного джерела тепла

З наданням чинності від 2019–01–01

Contents

Foreword

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Calculation method for non-balanced flue chimneys

5.1 General principles

5.2 Pressure requirements

5.3 Temperature requirement

5.4 Calculation procedure

5.5 Flue gas data characterising the heating appliance

5.6 Characteristic data for the calculation

5.7 Basic values for the calculation

5.8 Determination of the temperatures

5.9 Determination of the density of the flue gas and the velocity of the flue gas

5.10 Determination of the pressures

5.11 Minimum draught required at the flue gas inlet into the chimney and maximum allowed draught (PZe and PZemax) and maximum and minimum differential pressure at the flue gas inlet into the chimney (PZOe and PZOemin)

5.12 Calculation of the inner wall temperature at the chimney outlet (Tiob)

6 Secondary air for negative pressure chimneys

6.1 General

6.2 Calculation method

6.3 Basic values for the calculation of secondary air

6.4 Pressures

6.5 Temperature requirement with secondary air

7 Calculation method for balanced flue chimneys

7.1 General principles

7.2 Pressure requirements

7.3 Temperature requirements

7.4 Calculation procedure

7.5 Flue gas data characterizing the heating appliance

7.6 Characteristic data for the calculation

7.7 Basic values for the calculation

7.8 Determination of the temperatures

7.9 Determination of densities and velocities

7.10 Determination of pressures

7.11 Minimum draught required at the flue gas inlet into the chimney and maximum allowed draught (PZe and PZemax) and maximum and minimum differential pressure at the flue gas inlet into the chimney (PZOe and PZOemin)

7.12 Calculation of the inner wall temperature at the chimney outlet (Tiob)

8 Consideration of the condensation heat of the flue gas water vapour

8.1 General

8.2 Onset of condensation

8.3 Calculation of the flue gas temperature at the outlet of a chimney segment with condensation (j ≥ NsegK)

9 Consideration of chimney fans

9.1 General

9.2 Inline fans

9.3 Exhaust fans

Annex A (informative) Calculation of thermal resistance

Annex B (informative) Tables

Annex C (informative) Chimney outlet with regard to adjacent buildings

Annex D (informative) Determination of the gas constant R considering the condensation

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online