ДСТУ ISО 4872:2019 Шум. Вимірювання шуму будівельного устатковання, що працює під відкритим небом. Метод визначення відповідності нормам шуму (ISО 4872:1978, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 17.10.2019 № 315

ISO 4872:1978

Acoustics — Measurement of airborne noise emitted
by construction equipment intended for outdoor use —
Method for determining compliance with noise limits

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ ISО 4872:2019
(ISО 4872:1978, IDT)

Шум. Вимірювання шуму будівельного устатковання,
що працює під відкритим небом.
Метод визначення відповідності нормам шуму

З наданням чинності від 2020–01–01

Contents

Foreword

0 Introduction

1 Scope and field of application

1.1 General

1.2 Field of application

2 References

3 Definitions

3.1 Sound pressure level

3.2 Surface sound pressure level

3.3 Sound power level

3.4 Measurement surface

3.5 Background noise

4 Acoustic environment

4.1 Criterion for adequacy of the test environment

4.2 Criterion for background noise

4.3 Wind

5 Instrumentation

5.1 General

5.2 Microphone and associated cable

5.3 Frequency response of the instrumentation system

5.4 Calibration

6 Installation and operation of source

6.1 General

6.2 Auxiliary equipment

6.3 Operation of source during tests

7 Measurement of A-weighted sound pressure levels

7.1 Reference parallelepiped and measurement surface

7.2 Microphone positions on the hemispherical measurement surface

7.3 Microphone positions on the parallelepipedal measurement surface

7.4 Choice of measurement surface

7.5 Corrections for background noise

7.6 Measurements with sound level meter

7.7 Period of observation

7.8 Measurement of impulsive noise

8 Calculation of surface sound pressure level and sound power level

8.1 Calculation of surface sound pressure level

8 2. Calculation of sound power level

9 Information to be recorded

9.1 Sound source under test

9.2 Acoustic environment

9.3 Instrumentation

9.4 Acoustical data

10 Information to be reported

Annex A Test environment

Annex B Directivity index Dl

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online