ДСТУ EN 14825:2019 Кондиціонери, рідинні охолоджувальні агрегати та теплові насоси з електричними компресорами для опалення й охолодження приміщень. Випробування та оцінювання в умовах роботи за часткових нав...

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 29.11.2019 № 383

EN 14825:2018

Air conditioners, liquid chilling packages and heat pumps,
with electrically driven compressors, for space heating and cooling —
Testing and rating at part load conditions and calculation
of seasonal performance

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 14825:2019
(EN 14825:2018, IDT)

Кондиціонери, рідинні охолоджувальні агрегати
та теплові насоси з електричними компресорами
для опалення й охолодження приміщень.
Випробування та оцінювання в умовах роботи
за часткових навантажень і розрахунок сезонної продуктивності

З наданням чинності від 2020-01-01

Відповідає офіційному тексту

З питань придбанняофіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Terms, definitions, symbols, abbreviated terms and units

3.1 Terms and definitions

3.2 Symbols, abbreviated terms and units

4 Part load conditions for space cooling

4.1 General

4.2 Air-to-air units

4.3 Water (brine)-to-air units

4.4 Air-to-water (brine) units

4.5 Water (brine)-to-water (brine) units

5 Calculation methods for seasonal space cooling efficiency ƞs, c, SEER and SEERon

5.1 General

5.2 Calculation of the seasonal space cooling efficiency ƞs, c

5.3 General formula for calculation of SEER

5.4 Calculation of the reference annual cooling demand Qc

5.5 Calculation of the reference annual energy consumption for cooling Qce

5.6 Calculation of SEERon

5.7 Calculation procedure for determination of EERbin values at part load conditions A, B, C, D

6 Part load conditions for space heating

6.1 General

6.2 Air-to-air units

6.3 Water (brine)-to-air-units

6.4 Air-to-water (brine) units

6.5 DX-to-water (brine) and water (brine)-to-water (brine) units

7 Test methods for hybrid heat pumps

7.1 General

7.2 Separated test method

7.3 Combined test method

8 Calculation methods for seasonal space heating efficiency ƞs, h, SCOP, SCOPon and SCOPnet

8.1 General

8.2 Calculation of the seasonal space heating efficiency ƞs, h

8.3 General formula for calculation of SCOP

8.4 Calculation of the reference annual heating demand QH

8.5 Calculation of the annual energy consumption for heating QHE

8.6 Calculation of SCOP0n and SCOPnet

8.7 Calculation procedure for determination of COPbin values at part load conditions A to G

9 Part load conditions for process cooling

10 Calculation method for SEPR

10.1 General formula for calculation of SEPR

10.2 Calculation procedure for determination of EERbin values at part load conditions A, B, C, D

11 Test methods for testing capacities, EERbin and COPbin values during active mode at part load conditions

11.1 General

11.2 Refrigerant piping

11.3 Basic principles

11.4 Uncertainties of measurement

11.5 Test procedures for units with fixed capacity

11.6 Test procedure for staged and variable capacity units

12 Test methods for electric power input during thermostat-off mode, standby mode and crankcase heater mode and off mode

12.1 Uncertainties of measurement

12.2 Measurement of electric power input during thermostat-off mode

12.3 Measurement of the electric power input during standby mode

12.4 Measurement of the electric power input during crankcase heater mode

12.5 Measurement of the electric power input during off mode

13 Test report

14 Technical documentation

Annex A (normative) Applicable climate bins and hours for air conditioners with rated capacity of ≤ 12 kW for cooling, or heating if the product has no cooling function

Annex B (normative) Applicable climate bins and hours for air/water (brine)/DX-to-water (brine) heat pumps with a rated heat output ≤ 400 kW

Annex C (normative) Applicable climate bins and hours for process chillers

Annex D (normative) Applicable climate bins and hours for air-to-air units > 12 kW, water (brine)-to-air units and comfort chillers

Annex E (normative) Templates for technical documentation

Annex F (informative) Determination of water (brine) temperature for fixed capacity units with variable outlet temperature

Annex G (informative) Calculation example for SEERon and SEER - Application to a reversible air-to-air unit with variable capacity

Annex H (informative) Calculation example for SCOP0n and SCOPnet - Application to a fixed capacity air-to-water (brine) heat pump used for low temperature application

Annex I void

Annex J (informative) Calculation example for SCOPon and SCOPnet - Application to a fixed capacity brine-to-water (brine) heat pump used for medium temperature application

Annex K (informative) Calculation examples for SCOP0n for hybrid heat pumps

Annex L (informative) Calculation example for SEPR - Application to a process chiller with staged capacity

Annex M (informative) Compensation methods for air-to-water (brine) and water (brine)-to-water (brine) units

Annex N (normative) Rating of outdoor units of multi-split air conditioners and heat pumps

Annex ZA (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 206/2012 aimed to be covered

Annex ZB (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 813/2013 aimed to be covered

Annex ZC (informative) Relationship between this European Standard and the energy labelling requirements of Commission Delegated Regulation (EU) 811/2013aimed to be covered

Annex ZD (informative) Relationship between this European Standard and the ecodesign requirements of Commission Regulation (EU) 2015/1095 aimed to be covered

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online