ДСТУ EN 12326-1:2019 Шифер і камінь для покрівлі та зовнішнього облицювання стін. Частина 1. Технічні характеристики шиферу та шиферу з умістом карбонату (EN 12326-1:2014, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 19.12.2019 № 454

EN 12326-1:2014

Slate and stone for discontinuous roofing and external cladding -
Part 1: Specifications for slate and carbonate slate

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 12326-1:2019
(EN 12326-1:2014, IDT)

Шифер і камінь для покрівлі та зовнішнього облицювання стін.
Частина 1. Технічні характеристики шиферу
та шиферу з умістом карбонату

З наданням чинності від 2020–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь до
національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Symbols and abbreviations

5 Requirements

5.1 Origin and petrography

5.2 Thickness

5.3 Characteristic modulus of rupture

5.4 Grain

5.5 Water absorption

5.6 Freeze-thaw resistance (for slates with water absorption > 0,6)

5.7 Thermal cycle resistance

5.8 Apparent calcium carbonate content

5.9 Sulfur dioxide exposure test

5.10 Non-carbonate carbon content

5.11 Defects

5.12 Other dimensions

5.13 Fire

5.14 Release of dangerous substances

6 Assessment and verification of constancy of performance - AVCP

6.1 General

6.2 Number of slates required for type tests and factory production control

6.3 Testing frequency

6.4 Type testing

6.5 Factory production control (FPC)

7 Marking, labelling and packaging

Annex A (informative) Appearance of slates

Annex B (informative) Guidance for the calculation of the basic individual thickness of slates

Annex C (informative) General guidance on the installation of slates

Annex D (informative) Format for the accompanying commercial document

Annex E (informative) Method to estimate the nominal thickness of packed slates epc

Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online