ДСТУ CEN/TR 16142:2019 Бетон. Дослідження характеристик вилуговування затверділого бетону для використання в природному середовищі (CEN/TR 16142:2011, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 20.12.2019 № 462

CEN/TR 16142:2011

Concrete — A study of the characteristic leaching behaviour
of hardened concrete for use in the natural environment

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ CEN/TR 16142:2019
(CEN/TR 16142:2011, IDT)

Бетон. Дослідження характеристик вилуговування
затверділого бетону для використання в природному середовищі

З наданням чинності від 2020–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

Summary

1 Introduction

Part I

2 Scope of the study

2.1 Summary of three interlaboratory studies (ILS)

3 The experimental precision and its implications

3.1 Introduction

3.2 Discussion of the precision estimates

4 Standardisation of the characterisation leaching method

4.1 Introduction

4.2 Potential applications for the method

4.3 Necessary developments before any method can be applied

5 Conclusions

6 Appendices

6.1 Members of the Project Team that undertook the investigations

6.2 Laboratories participating in the precision experiment in ILS #3

7 References

Part II (informative) TEST METHOD USED IN THE STUDY FOR CHARACTERISATION OF LEACHING

1 Scope

2 Normative references

3 Terms, definitions, symbols and abbreviations

4 Materials and reagents

4.1 Materials

4.2 Reagents

5 Apparatus

5.1 General

5.2 Sealable tank (or bucket)

5.3 Filtering equipment

5.4 Membrane filters

5.5 Plastics bottles

5.6 pH meter

5.7 Conductivity meter

6 Determining the leaching behaviour

6.1 General

6.2 Principles

6.3 Diffusion (tank) test

7 Calculation of cumulative leaching and expression of results

7.1 Measured leaching of a component per leachate fraction

7.2 Measured and theoretical cumulative leaching of a component

8 Precision of cumulative leaching

8.1 General

8.2 Precision of the availability test

8.3 Precision of the diffusion (tank) test

9 Characterising the leaching behaviour

9.1 General

9.2 Determining the controlling leaching mechanism

9.3 Calculating the effective and mean effective diffusion coefficients of a component

9.4 Calculating the cumulative leaching of a component per surface unit, per time interval

9.5 Assessment of components for which no diffusion coefficient can be determined

9.6 Assessment of a diffusion coefficient

9.7 Comparison of the mobility of a component with the free mobility of the same component in water

9.8 Calculating the quantity leached, per mass unit, in the diffusion (tank) test

9.9 Calculating the extent of depletion of a component

10 Test report

Annex A (normative) Determination of the available (potential) amount of a component for leaching

Annex B (normative) Determination of the surface area (A) of a test piece (PD) for use in the diffusion (tank) test

Annex C (informative) Diagrammatic representation of the diffusion (tank) leaching procedure

Annex D (informative) Supplementary procedures for calculating the indicative upper limit for leaching for particular characteristics of the leaching behaviour

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online