ДСТУ EN 14246:2019 Елементи гіпсові для підвісних стель. Визначення, вимоги та методи випробування (EN 14246:2006, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 23.12.2019 № 479

EN 14246:2006

Gypsum elements for suspended ceilings —
Definitions, requirements and test methods

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 14246:2019
(EN 14246:2006, IDT)

Елементи гіпсові для підвісних стель.
Визначення, вимоги та методи випробування

З наданням чинності від 2020–01–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Types of gypsum ceiling elements for suspended ceilings

4.1 General

4.2 Gypsum units

4.3 Gypsum tiles

5 Requirements

5.1 Fire behaviour

5.2 Water vapour permeability (expressed as water vapour resistance factor)

5.3 Flexural strength (expressed as flexural breaking load)

5.4 Acoustic properties

5.5 Thermal properties — Thermal resistance (expressed as thermal conductivity)

5.6 Regulated substances

5.7 Appearance

5.8 Dimensions and tolerances

5.9 Squareness

5.10 Flatness (not for tiles with decorative face)

5.11 Mass per unit of surface and tolerance

5.12 Moisture content

5.13 pH

6 Test methods

6.1 Sampling

6.2 Preparation of the test specimens

6.3 Determination of flexural strength

6.4 Determination of surface appearance

6.5 Measurement of dimensions

6.6 Determination of squareness

6.7 Determination of flatness (not for gypsum elements with decorated faces)

6.8 Determination of the mass per surface unit

6.9 Determination of the moisture content

6.10 pH measurement

6.11 Test report

7 Evaluation of conformity

7.1 General

7.2 Type testing

7.3 Factory production control (FPC)

8 Designation

9 Marking, labelling and packaging

Annex A (informative) Sampling procedure for testing

Annex ZA (informative) Clauses of this European Standard addressing provisions of EU Construction Products Directive

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online