ДСТУ EN ISO 15494:2019 Системи пластмасових трубопроводів промислового призначення. Полібутен (PB), поліетилен (PE), поліетилен підвищеної термостійкості (PE-RT), сітчастий поліетилен (PE-X) та поліпропілен (...

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 26.12.2019 № 505

EN ISO 15494:2018

Plastics piping systems for industrial applications —
Polybutene (PB), polyethylene (PE),
polyethylene of raised temperature resistance (PE-RT),
crosslinked polyethylene (PE-X), polypropylene (PP) —
Metric series for specifications for components and the system
(ISO 15494:2015)

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 130 15494:2019
(EN ISO 15494:2018, IDT;
ISO 15494:2015, IDT)

Системи пластмасових трубопроводів
промислового призначення.
Полібутен (РВ), поліетилен (РЕ),
поліетилен підвищеної термостійкості (PE-RT),
сітчастий поліетилен (РЕ-Х) та поліпропілен (РР).
Технічні умови на компоненти та систему. Метрична серія

З наданням чинності від 2020-01-01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

3.1 Geometrical definitions

3.2 Material definitions

3.3 Definitions related to material characteristics

3.4 Definitions related to service conditions

4 Symbols and abbreviated terms

4.1 Symbols

4.2 Abbreviated terms

5 Material

5.1 General

5.2 Hydrostatic strength properties

5.3 Material characteristics

5.4 Reprocessable and recyclable material

5.5 Materials for components not made from PB, PE, PE-RT, PE-X, or PP

6 General characteristics

6.1 Appearance

6.2 Colour

6.3 Influence of UV radiation

7 Geometrical characteristics

7.1 General

7.2 Mean outside diameters, out-of-roundness (ovality), and tolerances

7.3 Wall thicknesses and related tolerances

7.4 Angles

7.5 Laying lengths

7.6 Threads

7.7 Mechanical fittings

7.8 Joint dimensions of valves

8 Mechanical characteristics

8.1 Resistance to internal pressure of components

8.2 Calculation of the test pressure for components

9 Physical characteristics

10 Chemical characteristics

10.1 Effects on the component material(s)

10.2 Effects on the fluids

11 Electrical characteristics

12 Performance requirements

12.1 General

12.2 Fusion compatibility

13 Classification of components

14 Design and installation

15 Declaration of conformity

16 Marking

16.1 General

16.2 Minimum required marking of pipes

16.3 Minimum required marking of fittings

16.4 Minimum required marking of valves

Annex A (normative) Specific characteristics and requirements for industrial piping systems made from polybutene (PB)

Annex В (normative) Specific characteristics and requirements for industrial piping systems made from polyethylene (PE)

Annex C (normative) Specific characteristics and requirements for industrial piping systems made from polyethylene of raised temperature resistance (PE-RT)

Annex D (normative) Specific characteristics and requirements for industrial piping systems made from crosslinked polyethylene (PE-X)

Annex E (normative) Specific characteristics and requirements for industrial piping systems made from polypropylene (PP) .

Annex F (informative) Design and installation

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online