ДСТУ EN 14471:2019 Димарі. Система димоходів з пластмасовою футеровкою. Вимоги та методи випробування (EN 14471:2013+A1:2015, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 21.12.2019 № 469

EN 14471:2013 + A1:2015

Chimneys — System chimneys with plastic fmue liners —
Requirements and test methods

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 14471:2019
(EN 14471:2013 + A1:2015, IDT)

Димарі. Система димоходів з пластмасовою футеровкою.
Вимоги та методи випробування

З наданням чинності від 2020–01–01

Відповідає офіційному тексту

З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП "УкрНДНЦ" http://uas.org.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Classification and designation

4.1 General

4.2 Temperature classes

4.3 Pressure classes

4.4 Sootfire resistance classes

4.5 Condensate resistance classes

4.6 Corrosion resistance classes

4.7 Thermal resistance

4.8 Distance to combustible material

4.9 Location

4.10 Reaction to fire

4.11 Outer wall classes

4.12 Designation

5 Dimensions and tolerances

6 Performance requirements

6.1 General

6.2 Resistance to the combination of mechanical and thermal load

6.3 Components subject to wind load

6.4 Fire resistance

6.5 Hygiene, health and environment

6.6 Safety in use

6.7 Materials, durability

7 Test methods

7.1 General

7.2 Resistance to the combination of mechanical and thermal load

7.3 Components subject to wind load

7.4 Fire resistance

7.5 Hygiene, health and environment

7.6 Safety in use

7.7 Materials

8 Dangerous substances

9 Product information

9.1 General

9.2 Minimum information to be included in the manufacturer’s instructions

10 Assessment and Verification of the Constancy of Performance (AVCP)

10.1 General

10.2 Product type determinations

10.3 Further type testing

10.4 Continuous surveillance of FPC

10.5 Factory production control (FPC)

11 Marking and labelling

11.1 Marking chimney components

11.2 Chimney plate

Annex A (normative) Test methods for characterization

Annex B (informative) Examples of characterization

Annex C (normative) Test methods to determine the effect to long-term thermal load, long-term condensate exposure, wet/dry cycling and resistance to UV

Annex D (normative) Simplified calculation of thermal resistance for circular flues

Annex E (informative) Method for applying an evenly distributed load (horizontal)

Annex F (informative) Resistance to UV

Annex G (normative) Terminals

Annex H (normative) Test methods for flow resistance

Annex I (normative) Test methods for wind effects on pressure

Annex J (normative) Test methods for wind effects on recirculation

Annex K (normative) Test method for rain water ingress

Annex L (normative) Test method of icing effects

Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online