ДСТУ EN 15283-1:2019 Плити гіпсові з волокнистою арматурою. Визначення, вимоги та методи випробування. Частина 1. Гіпсокартон з волокнистою арматурою (EN 15283-1:2008 + A1:2009, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))

Наказ від 18.12.2019 № 442

EN 15283-1:2008+A1:2009

Gypsum boards with fibrous reinforcement —
Definitions, requirements and test methods —
Part 1: Gypsum boards with mat reinforcement

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 15283-1:2019
(EN 15283-1:2008 + A1:2009, IDT)

Плити гіпсові з волокнистою арматурою.
Визначення, вимоги та методи випробування.
Частина 1. Гіпсокартон з волокнистою арматурою

З наданням чинності від 2020–01–01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Requirements

4.1 Mechanical characteristics

4.2 Fire behaviour

4.3 Acoustic properties

4.4 Water vapour permeability (expressed as water vapour resistance factor)

4.5 Thermal resistance (expressed as thermal conductivity)

4.6 Dangerous substances

4.7 Dimensions and tolerances

4.8 Additional requirements for gypsum boards with mat reinforcement with reduced water absorption rate Type H1 and H2

4.9 Additional requirements for gypsum boards with mat reinforcement with enhanced surface hardness Type I

4.10 Additional requirements for gypsum boards with mat reinforcement with improved core cohesion at high temperature Type F

4.11 Impact resistance

5 Test methods

5.1 Sampling

5.2 Determination of width

5.3 Determination of length

5.4 Determination of thickness

5.5 Determination of squareness

5.6 Determination of flexural breaking load

5.7 Determination of deflection under load

5.8 Determination of total water absorption

5.9 Determination of surface hardness of the board

6 Evaluation of conformity

6.1 General

6.2 Initial type testing

6.3 Factory production control

7 Designation of gypsum boards with mat reinforcement

8 Marking, labelling and packaging

Annex A (informative) Sampling procedure for testing

Annex B (normative) Mounting and fixing for testing according to EN 13823 (SBI test)

Annex ZA (informative) Clauses of this European Standard addressing the provisions of EU Construction Products Directive

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online