ДСТУ EN 14140:2019 Обладнання та комплектовання для зрідженого газу. Транспортабельні сталеві зварні балони для зрідженого газу. Альтернативне проектування та конструювання (EN 14140:2003, IDT)

Даний документ доступний у тарифі «ВСЕ ВРАХОВАНО»

У Вас є питання стосовно документа? Ми раді на них відповісти!Перелік безкоштовних документівПомітили помилку в документі або на сайті? Будь ласка, напишіть нам про це!Залишити заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)

Наказ від 18.12.2019 № 439

EN 14140:2003

Transportable refillable welded steel cylinders
for liquefied petroleum gas (LPG) —
Alternative design and construction

прийнято як національний стандарт
методом підтвердження за позначенням

ДСТУ EN 14140:2019
(EN 14140:2003, IDT)

Обладнання та комплектовання для зрідженого газу.
Транспортабельні сталеві зварні балони для зрідженого газу.
Альтернативне проектування та конструювання

З наданням чинності від 2020–01–01

Відповідає офіційному тексту

З питань придбання
офіційного видання звертайтесь до
національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.org.ua)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms, definitions and symbols

3.1 Terms and definitions

3.2 Symbols

4 Materials

5 Design

5.1 General requirements

5.2 Calculation of cylindrical shell wall thickness

5.3 Design of torispherical and semi-ellipsoidal ends concave to pressure

5.4 Ends of other shapes

5.5 Minimum wall thickness

5.6 Design of openings

5.7 Valve protection

5.8 Non-pressure containing attachments welded to the cylinder

5.9 Resistance against external corrosion

5.10 Over-moulded cylinders

5.11 Hot air balloon cylinders

6 Construction and workmanship

6.1 General

6.2 Environment

6.3 Welding qualification

6.4 Plates and pressed parts

6.5 Welded joints

6.6 Tolerances

6.7 Closure of openings

6.8 Heat treatment

7 Tests and examinations

7.1 General

7.2 Types of test and evaluation of test results

7.3 Test specimens and related tests and examinations

7.4 NDT

7.5 Prototype and production batch testing

8 Technical requirements for type approval

8.1 General

8.2 Extent of testing

8.3 Design type variations

9 Initial inspection and tests

9.1 Tests and examinations applicable to all cylinders

9.2 Radiographic examination

9.3 Macro examination

9.4 Examination of bung welding

9.5 Examination of welding of non-pressure containing attachments

9.6 Unacceptable imperfections in radiographic or macro examination

9.7 Production pressure test

9.8 Production batch testing (Mechanical/Burst tests)

9.9 Failure to meet mechanical and burst test requirements

9.10 Production adhesion test for over-moulded cylinders

9.11 Production water absorption test for over-moulded cylinders

10 Marking

11 Documentation

12 Certification

Annex A (normative) Additional manufacturers markings

Annex B (informative) Over-moulded cylinder

Annex C (informative) Hot Air Balloon Cylinders

Annex D (informative) Environmental checklist

Bibliography

Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».

Увійти в Особистий кабінет Детальніше про тарифи

БУДСТАНДАРТ Online