ДСТУ EN 483:2019 Котли газові для центрального опалення. Котли типу С з номінальною тепловою потужністю не більше ніж 70 кВт (EN 483:1999, IDT). Зі Зміною № 2:2019 та Поправкою № 1:2019
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 19.12.2019 № 451
EN 483:1999
Gas-fired central heating boilers —
Type С boilers of nominal heat input not exceeding 70 kW
прийнято як національний стандарт
методом підтвердження за позначенням
ДСТУ EN 483:2019
(EN 483:1999, IDT)
Пластмаси. Невеликі камери для кондиціювання
та випробування із застосуванням водних розчинів
для підтримки відносної вологості на постійному рівні
З наданням чинності від 2020-01-01
Відповідає офіційному тексту
З питань придбання офіційного видання звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 19.12.2019 № 451
EN 483:1999/A2:2001
Gas-fired central heating boilers —
Type С boilers of nominal heat input not exceeding 70 kW
прийнято як зміну до національного
стандарту
методом підтвердження за позначенням
ДСТУ EN 483:2019 (EN 483:1999, IDT)/
Зміна № 2:2019 (EN 483:1999/A2:2001, IDT)
Пластмаси. Невеликі камери для
кондиціювання
та випробування із застосуванням водних розчинів
для підтримки відносної вологості на постійному рівні
З наданням чинності від 2020-01-01
Відповідає офіційному тексту
З питань придбання офіційного видання
звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр
проблем стандартизації, сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 19.12.2019 № 451
EN 483:1999/A2:2001/AC:2006
Gas-fired central heating boilers —
Type С boilers of nominal heat input not exceeding 70 kW
прийнято як поправку до зміни до
національного стандарту
методом підтвердження за позначенням
ДСТУ EN 483:2019 (EN 483:1999, IDT)/
Зміна № 2:2019 (EN 483:1999/A2:2001, IDT)/
Поправка № 1:2019 (EN 483:1999/A2:2001/AC:2006, IDT)
Пластмаси. Невеликі камери для
кондиціювання
та випробування із застосуванням водних розчинів
для підтримки відносної вологості на постійному рівні
З наданням чинності від 2020-01-01
Відповідає офіційному тексту
З питань придбання офіційного видання
звертайтесь
до національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
CONTENTS
Foreword
1. Scope
2. Normative references
3. Definitions
3.1 reference conditions
3.2 Combustible gases
3.3 Constituent parts of the boiler
3.4 Operation of the boiler
3.5 Country of destination
4. Classification of boilers
4.1 Gases and categories
4.2 Mode of air supply and evacuation of the combustion products
4.3 Maximum water-side operating pressure
4.4 Expansion system
5. Constructional requirements
5.1 General
5.2 Conversion to different gases
5.3 Materials and thicknesses
5.4 Method of construction
5.5 Electrical equipment
5.6 Requirements for adjusting, control and safety devices
5.7 Bumers
5.8 Pressure test points
6. Operational requirements
6.1 General
6.2 Soundness
6.3 Heat inputs and heat output
6.4 Safety of operation
6.5 Adjusting, control and safety devices
6.6 Combustion
6.7 Useful efficiencies
6.8 Resistance of the materials to pressure
7. Test methods
7.1 General test conditions
7.2 Soundness
7.3 Heat inputs and heat output
7.4 Safety of operation
7.5 Adjusting, control and safety devices
7.6 Combustion
7.7 Useful efficiencies
7.8 Resistance of the materials to pressure
7.9 Hydraulic resistance
8. Marking and instructions
8.1 Boiler marking
8.2 Instructions
Annex A (informative) National situations
Annex В (informative) Particular national conditions
Annex C (informative) Classification of type C boilers
Annex D (informative) Composition of the gas circuit
Annex E (informative) Compilation of the test conditions
Annex F (normative) Test apparatus for type C2 boilers
Annex G (informative) Practical method of calibrating the test rig to enable the heat loss Dp to be determined
Annex H (informative) A deviations
Annex J (informative) Main symbols and abbreviations used
Annex К (informative) Examples for marking
Annex L (informative) Example of calculation of the weighting factors for a boiler with several rates following Table 17
Annex M (informative) Calculation of conversions of NOx
Annex N (informative) Requirements and test methods for separate air supply and combustion products evacuation ducts of type C6 boilers
Annex P (informative) Determination of the heat losses from the test rig of the indirect method and the contributions of the circulating pump of the test rig
Annex Q (informative) Means of determining the ignition time at full rate
Annex ZA (informative) Clauses of this European standard addressing essential requirements or other provisions of EU Directives
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».