ДСТУ EN 16728:2019 Обладнання та приладдя для скрапленого газу. Транспортабельні балони для багаторазового використання LPG, відмінні від традиційних зварних та паяних сталевих балонів. Періодичне перевіряння...
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і
навчальний центр
проблем стандартизації,
сертифікації та якості»
(ДП «УкрНДНЦ»)
Наказ від 26.12.2019 № 501
EN 16728:2016
LPG equipment and accessories —
Transportable refutable
LPG cylinders other than traditional
welded and
brazed steel cylinders — Periodic inspection
прийнято як національний стандарт
методом підтвердження за позначенням
ДСТУ EN 16728:2019
(EN 16728:2016, IDT)
Цистерни для перевезення небезпечних вантажів.
Допоміжне обладнання. Донні клапани
з номінальним
діаметром більше чи менше ніж 100 мм
З наданням чинності від 2020-01-01
Відповідає офіційному тексту
З питань придбання офіційного видання звертайтесь
до
національного органу стандартизації
(ДП «УкрНДНЦ» http://uas.gov.ua)
Contents
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for periodic inspection
4.1 General
4.2 Steel and aluminium cylinders
4.3 Over-moulded cylinders.
4.4 Composite cylinders
4.5 Rejected cylinders
5 Inspections and tests
5.1 General
5.2 External visual inspection
5.2.1 Preparation for external visual inspection
5.2.2 Inspection procedure
5.2.3 Rejection criteria
5.3 Proof pressure test
5.3.1 General
5.3.2 Hydraulic proof pressure test
5.3.3 Pneumatic proof test and leak test
5.4 Check of the internal condition of the cylinder
5.4.1 Welded aluminium and steel cylinders of alternative design and construction
5.4.2 Check of the internal condition of composite cylinders
5.5 Inspection of cylinder threads
5.5.1 General
5.5.2 Internal threads
5.5.3 External threads
5.5.4 Damaged threads
5.6 Inspection of valves.
6 Final operations
6.1 General
6.2 Valving
6.3 Tare mass
6.4 Marking.
6.5 Purging
7 Repair of cylinders
8 Records
Annex A (normative) Specific requirements for external visual inspection for welded steel LPG cylinders in accordance with EN 14140 or equivalent standard
A.1 General
A.2 Procedure for establishing rejection criteria carbon steel cylinders
A.3 Rejection criteria for stainless steel cylinders
Annex B (normative) Specific requirements for external visual inspection of welded aluminium LFG cylinders
Annex C (normative) Specific requirements for visual inspection of composite LPG cylinders
C.1 Establishment of rejection criteria
C.1.1 General
C.1.2 Procedure
C.2 Examples of rejection criteria
C.2.1 Cylinders without a metallic liner
C.2.2 Cylinders with a metallic liner
Annex D (informative) Conditions for 15-year periodic inspection interval of welded steel cylinders manufactured before 1st January 2015
D.1 General
D.2 Concept of control
D.3 Conditions
Annex E (informative) Guidance on conditions for 10-year periodic inspection interval of composite cylindersAnnex F (normative) Specific Periodic inspection procedure for over-moulded cylinders (OMC)
F.1 General
F.1.1 Introduction
F.1.2 Valve
F.1.3 Marking and records
F.2 Periodic inspection
F.2.1 General
F.2.2 External visual inspection
F.2.2.1 General
F.2.2.2 Sampling
F.2.2.2.1 General
F.2.2.2.2 Peeling and corrosion test
F.2.2.2.3 Adhesion tests of the polyurethane material
F.2.2.3 Test frequency
F.2.3 Burst test
F.2.4 Rejection criteria and annual production sampling
F.2.5 Periodic inspection tests reports and records
F.3 Lifetime
Annex G (informative) Example of an Over-Moulded CylinderBibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».