ДСТУ EN 50131-2-5:2014 Системы тревожной сигнализации. Системы охранной сигнализации. Часть 2-5. Требования к комбинированным пассивным инфракрасным и ультразвуковым извещателям (EN 50131-2-5:2008, EN 50131-2...

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

МІНІСТЕРСТВО ЕКОНОМІЧНОГО РОЗВИТКУ І ТОРГІВЛІ УКРАЇНИ

Наказ від 30.12.2014 № 1494

EN 50131-2-5:2008, EN 50131-2-5:2008/IS1:2014

Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for
combined passive infrared and ultrasonic detectors

прийнято як національний стандарт
методом «підтвердження» за позначенням
Відповідає офіційному тексту

ДСТУ EN 50131-2-5:2014
(EN 50131-2-5:2008, EN 50131-2-5:2008/IS1:2014, IDT)

Системи тривожної сигналізації. Системи охоронної сигналізації.
Частина 2-5. Вимоги до комбінованих пасивних інфрачервоних та
ультразвукових сповіщувачів

З наданням чинності від 2016–01–01

Contents

Introduction

1 Scope

2 Normative references

3 Definitions and abbreviations

3.1 Definitions

3.2 Abbreviations

4 Functional requirements

4.1 Event processing

4.2 Detection

4.3 Operational requirements

4.4 Immunity of the individual technologies to incorrect operation

4.5 Tamper security

4.6 Electrical requirements

4.7 Environmental classification and conditions

5 Marking, identification and documentation

5.1 Marking and/or identification

5.2 Documentation

6 Testing

6.1 Generalities

6.2 General test conditions

6.3 Basic detection test

6.4 Walk testing

6.5 Switch-on delay, time interval between signals and indication of detection

6.6 Self tests

6.7 Immunity of individual technologies to incorrect operation

6.8 Tamper security

6.9 Electrical tests

6.10 Environmental classification and conditions

6.11 Marking, identification and documentation

Annex A (normative) Dimensions & requirements of the standardised test magnets

Annex B (normative) General testing matrix

Annex C (informative) Walk test diagrams

Annex D (normative) Procedure for calculation of average temperature difference

Annex E (informative) Basic detection target for the basic test of detection capability

Annex F (informative) Equipment for walk test velocity control

Annex G (informative) Immunity to visible and near infrared radiation – Notes on calibration of the light source

Annex H (informative) Example list of small tools

Annex I (informative) Test for resistance to re-orientation of adjustable mountings

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online