ДСТУ EN 13230-1:2015 Залізничний транспорт. Колія. Бетонні шпали та опори. Частина 1. Загальні вимоги (EN 13230-1:2009, IDT)
ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ
Державне підприємство
«Український науково-дослідний і навчальний центр проблем стандартизації,
сертифікації та якості» (З питань придбання офіційного видання звертайтесь до національного органу стандартизації
(ДП «УкрНДНЦ»))
Наказ від 25.12.2015 №205
EN 13230-1:2009
Railway applications. Track. Concrete sleepers and bearers. General requirements
прийнято як
національний стандарт методом «підтвердження» за позначенням
Відповідає офіційному тексту
ДСТУ EN 13230-1:2015 (EN 13230-1:2009, IDT)
Залізничний транспорт. Колія. Бетонні шпали та опори. Частина 1. Загальні вимоги
З наданням чинності від 2016-01-01
Contents
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Common characteristics
4.1 General
4.2 Loading
4.2.1 Loads
4.2.2 Load distribution
4.3 Design bending moments
4.3.1 General
4.3.2 Bending moments at rail seat
4.3.3 Bending moments at the centre part
4.4 Data to be supplied
4.4.1 General
4.4.2 Data to be supplied by the purchaser
4.4.3 Data to be supplied by the supplier
5 Materials
5.1 General requirements
5.2 Cement
5.3 Aggregates
5.4 Mixing water
5.5 Admixtures
5.6 Concrete
5.7 Steel
5.7.1 Prestressing tendons
5.7.2 Reinforcing steel
5.7.3 Steel connecting bar
5.8 Embedded components
6 General requirements
6.1 Design
6.1.1 Geometrical design
6.1.2 Concrete cover
6.1.3 Prestressing system design
6.1.4 Reinforcing steel design
6.2 Manufacturing process
6.2.1 General requirements
6.2.2 Natural curing
6.2.3 Accelerated curing
6.3 Surface finish
6.4 Marking
7 Product testing
7.1 General
7.2 Mechanical parameters
7.3 Tests on product
7.4 Tests on concrete
7.5 Tests in combination with the fastening system
7.6 Additional tests
8 Quality control
8.1 General
8.2 Quality control during design approval tests
8.3 Quality control during manufacturing
Annex A (informative) Test method to determine the Taber Wear index for a fine aggregate
A.1 General
A.2 Apparatus
A.3 Preparation of Mortar Tiles
A.3.1 Sampling
A.3.2 Mortar Tile preparation
A.3.3 Mortar Tile curing
A.3.4 Grinding of Mortar Tiles
A.4 Test procedure
A.5 Calculation of Taber Wear Index
Annex B (informative) Test method for freeze-thaw resistance
Annex C (informative) Test method for measuring the water absorption of concrete at atmospheric pressure
C.1 Introduction
C.2 Samples
C.3 Sequence of test
C.4 Requirements
Annex D (informative) Definition and recommendation for measurement of rail seat inclination and twist between rail seats
Annex E (informative) Bending moment calculation
Annex F (informative) Surface finish
F.1 General
F.2 General information for surface finish
F.3 Surface finish of the rail seat
F.4 Surface finish of all other surfaces
F.5 Detailed procedure for remedial work
Annex G (informative) Quality control during manufacturing - Routine tests and frequency of testing
G.1 General
G.2 Data of the sleeper to be checked
G.3 Examples for frequency of testing
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2008/57/EC
Bibliography
Повна версія документа доступна в тарифі «ВСЕ ВРАХОВАНО».