ДСТУ CLC/TS 50131-2-8:2014 Системы тревожной сигнализации. Системы охранной сигнализации. Часть 2-8. Извещатели охранные ударные (CLC/TS 50131-2-8:2012; CLC/TS 50131-2-8:2012/IS1:2014, IDT)

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms, definitions and abbreviations

3.1 Terms and definitions

3.2 Abbreviations

4 Functional requirements

4.1 General

4.2 Event Processing

4.3 Detection

4.3.1 Detection performance

4.3.2 Indication of detection

4.4 Immunity to false alarm sources

4.4.1 General      

4.4.2 Immunity to Small objects hitting a framed window

4.4.3 Immunity to Hard objects hitting a framed window

4.4.4 Immunity to Static pressure

4.4.5 Immunity to Dynamic pressure

4.4.6 Standard Immunity Test

4.5 Operational requirements

4.5.1 Time interval between intrusion signals or messages

4.5.2 Switch on delay

4.5.3 Self tests

4.6 Tamper security

4.6.1 General

4.6.2 Resistance to and detection of unauthorised access to components and means of adjustment

4.6.3 Detection of removal from the mounting surface

4.6.4 Resistance to magnetic field interference

4.6.5 Detection of masking

4.7 Electrical requirements

4.7.1 General

4.7.2 Shock detectors current consumption

4.7.3 Slow input voltage change and voltage range limits

4.7.4 Input voltage ripple

4.7.5 Input voltage step change

4.8 Environmental classification and conditions

4.8.1 Environmental classification

4.8.2 Immunity to environmental conditions

5 Marking, identification and documentation

5.1 Marking and/or identification

5.2 Documentation

6 Testing

6.1 General

6.2 General test conditions

6.2.1 Standard conditions for testing

6.2.2 General detection testing environment and procedures

6.3 Basic Detection Test

6.3.1 General

6.3.2 Basic Detection Test Method

6.4 Performance tests

6.4.1 General

6.4.2 Verification of detection performance

6.5 Switch-on delay, time interval between signals and indication of detection

6.6 Self tests

6.7 Immunity to incorrect operation

6.7.1 General

6.7.2 Immunity to Small objects hitting the glass

6.7.3 Immunity to Hard objects hitting a framed window

6.7.4 Immunity to Static pressure

6.7.5 Immunity to Dynamic pressure

6.7.6 Standard Immunity Test

6.8 Tamper security

6.8.1 General

6.8.2 Resistance to and detection of unauthorised access to the inside of the shock detector through covers and existing holes

6.8.3 Detection of removal from the mounting surface

6.8.4 Resistance to magnetic field interference

6.8.5 Detection of shock detector masking

6.9 Electrical tests

6.9.1 General

6.9.2 Shock detector current consumption

6.9.3 Slow input voltage change and input voltage      range limits

6.9.4 Input voltage ripple

6.9.5 Input voltage step change

6.9.6 Total loss of power supply

6.10 Environmental classification and conditions

6.11 Marking, identification and documentation

6.11.1 Marking and/or identification

6.11.2 Documentation

Annex A (normative) Standard test material

Annex В (normative) Dimensions and requirements of the standardised Test Magnets

Annex С (normative) General Testing Matrix

Annex D (normative) Standard immunity glass pane

Annex E (normative) Spring operated Hammer

Annex F (informative) Example list of small tools

Annex G (normative) Minimum performance requirements gross and shock integration attack tests

Annex H (normative) Immunity test: Small objects hit sensitivity

Annex I (normative) Immunity test: Hard objects hit sensitivity

Annex J (normative) Immunity test: Static pressure sensitivity

Annex К (normative) Immunity test: Dynamic pressure sensitivity

Bibliography