ДСТУ EN 71-7:2015 Безопасность игрушек. Часть 7. Краски для рисования пальцами. Требования и методы испытания (EN 71-7:2014, IDT)

Данный документ доступнен в тарифе «ВСЕ ВКЛЮЧЕНО»

У Вас есть вопросы по документу? Мы рады на них ответить!Перечень бесплатных документовОбнаружили ошибку в документе или на сайте? Пожалуйста, напишите нам об этом!Оставить заявку на документ

ПІДТВЕРДЖУВАЛЬНЕ ПОВІДОМЛЕННЯ

Державне підприємство «Український науково-дослідний і навчальний
центр проблем стандартизації, сертифікації та якості»
(   
(ДП «УкрНДНЦ»))

Наказ від 25.12.2015 № 207

EN 71-7:2014

Safety of toys - Part 7: Finger paints - Requirements and test methods

прийнято як національний стандарт
методом «підтвердження» за позначенням
 

ДСТУ EN 71-7:2015
(EN 71-7:2013, IDT)

Безпечність іграшок. Частина 7. Фарби для малювання пальцями.
Вимоги та методи випробування

З наданням чинності від 2016-01-01

Contents

Foreword

Introduction

1 Scope

2 Normative references

3 Terms and definitions

4 Requirements

4.1 General

4.2 Colourants

4.3 Preservatives

4.4 Migration of certain elements

4.5 Limits for impurities

4.5.1 Limits for primary aromatic amines

4.5.2 Limits for other impurities

4.6 Taste and smell

4.7 pH-value

4.8 Binding agents, extenders, humectants and surfactants

4.9 N-Nitrosamines

4.10 Containers

5 Product information

5.1 General

5.2 Marking

5.2.1 Primary packaging

5.2.2 Container

D.1 General

D.2 Reagents

D.3 Apparatus

D.4 Instrumentation

D.5 Sampling procedure

D.6 Procedure

D.7 Calculation

D.8 Precision

D.8.1 Linearity

D.8.2 Limits of Detection (LOD) and Quantification (LOQ)

D.8.3 Repeatability and reproducibility data for soluble aromatic amines

D.8.4 Repeatability and reproducibility data for reductively cleaved aromatic amines

D.8.5 Recovery

D.9 Report

D.10 Additional Information

E.1 Principle

E.2 Standards, reagents and solvents

E.3 Apparatus

E.4 Instrumentation

E.5 Sampling

E.6 Procedure

E.6.1 General

E.6.2 Sample preparation

E.6.3 Solvent extraction

E.6.4 Solid phase extraction

E.6.5 Sample concentration for determining HCB and PCB congeners

E.6.6 Sample concentration for determining B[a]P

E.6.7 Gas chromatography conditions

E.6.8 Mass spectrometry

E.6.9 SIM mode

E.7 Calculation

E.8 Precision

E.8.1 Linearity

E.8.2 Limits of detection (LOD) and Quantification (LOQ)

E.8.3 Repeatability and reproducibility data for HCB, PCB congeners and B[a]P

E.8.4 Recovery

E.9 Report

E.10 Additional information

F.1 Finger paints (see 3.1 and 3.2)

F.2 Colourants (see 4.2.1)

F.3 Preservatives (see 4.3)

F.4 Elements (see 4.4)

F.5 Primary aromatic amines (see 4.5.1.2, Tables 1 and 2 and Annex D)

F.6 Limit for Benzo[a]Pyrene (see 4.5.2)

F.7 Embittering agents (see 4.6)

F.8 pH value (see 4.7)

F.9 N-Nitrosamines (see 4.9)

F.10 Container (see 4.10)

F.11 Labelling phrases (see 5.2.1.2)

F.12 List of polychlorinated biphenyl congeners (see Annex E)

F.13 Reference materials (see Annex D and E)

F.14 PCB Analytical Method (see E.6)

Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/48/EC

Bibliography

Полная версия документа доступна в тарифе «ВСЕ ВКЛЮЧЕНО».

Войти в Личный кабинет Подробнее о тарифах

БУДСТАНДАРТ Online